Tube PumpProduct Introduction

There are two kindsof tube pump：Water ring type，Oil free type，
Water ring pump suitable for use in a mine is deep, long distance undergroundextraction to use.There are 2 types of water ring type，one of is 2SK-1.5，This kind of pump suctionvolume per minute 1.5m³，the other is 2SK-3.0，This pump is swept volumeper minute 3.0m³.
The mine shaft tube is along the wall during installation，Laying way and the shaftpower cable laying in the same way.and underground tube, single tube is alongthe roadway hanging installation.Hang on wall of roadway tube branch box.
Tube Pump to be installed indoors, pump room should be set inside the pump roomnear the measure, the ground, underground, area of not less than 6 m2. Pump,pump installation see the pump specifications.

The main characteristicof tube pump station：Large swept volume, low noise, use of circulatingcooling water, don't need to add vacuum oil, no maintenance.tube pump installeddirectly in the control cabinet and responsible for the individualmonitoring-station of the underground to monitor gas to the gas analysis room.

Tube PumpParameters

（1）Voltage：380V±10%，three phase 50Hz AC；
（2）Total power ：6KW；
（3）Temperature ：5～40℃；
（5）Relative Humidity：≤90% 。