Electronic Buzzer, buy 9.0x3.2MM SMT Magnetic Thin Electronic Buzzer 83 Db 5.5 Ohm on China Suppliers Mobile

Product Details

Delivery Time:To be advised
Certification:ISO9001 TS16949

9.0x3.2MM SMT Magnetic Thin Electronic Buzzer 83 Db 5.5 Ohm

Quick Detail:

Size: D9.0mm*H3.2mm SPL: Min.83dB at 10cm Input 2700Hz/1.5Vo-p 1/2 Duty Square Wave Coil Resistance: 5.51 ohm Operating Voltage: 1-3Vo-p Rated Current: Max.100mA Input 2700Hz/1.5Vo-p 1/2 Duty Square Wave

Description:

buzzer SMD Electro-Magnetic Buzzer SMD Electro-Magnetic Element 1.5V Buzzer thin and small Buzzer

Specification:

1. Technical Parameter

Measuring condition

Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H., Atmospheric pressure: 860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ～1060hPa) is regulated to measure.

1	Rated Voltage	1.5 Vo-p
2	Operating Voltage	1.0～3.0 Vo-p
3	Rated Current	Max.100mA ,at 2700Hz 50% duty Square Wave 1.5Vo-p
4	Sound Output at 10cm	Min. 83dB,at 2700Hz 50% duty Square Wave 1.5Vo-p
5	Coil Resistance	5.5±1Ω
6	Resonant Frequency	2700Hz
7	Operating Temperature	-20℃～+70℃
8	Store Temperature	-40℃～+85℃
9	Net Weight	Approx 1g
10	RoHS	Yes

2. Dimensions Unit: mm

*Unit: mm; Tolerance: ±0.3mm Except Specified

*Housing Material: Black LCP

*Terminal plate: 2 soldering pads, tin Plating Brass

3.Electrical And Acoustical Measuring Condition

Recommended Driving Circuit

Resonant frequency, 1/2 duty cycle. Square wave.

Signal amplitude should be large enough tosaturate

the transistor.

Recommended Setting

4.Frequency Response

1.5Vo-p 50% duty Square wave,10cm

Application:

CHANGZHOU FHD ELECTRONICS CO., LTD is a professional manufacturer in the field of ceramic components ,our products is widely used in household electrical appliances; mobile phones; computers; medical equipment; alarm system; pos machine ；access control system; toy; automobile; instrument and meter; electrical equipment; we can produce all kinds of piezo buzzers as long as you have the following details; welcome to consultation discussion.

Surface mounting condition

(1)Reflow soldering

Note:

In automated mounting of the SMD sound transducers on PCB, any bending, expanding and pulling forces or shocks against the SMD sound transducers shall be kept minimum to prevent them from electrical failures and mechanical damages of the devices. In the reflow soldering, too high soldering temperatures and too large temperature Gradient such as rapid heating or cooling may cause electrical failures and mechanical damages of the devices.

(2) Soldering pattern

Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

(1)Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10℃. Input rated voltage

Test Resonant frequency, 1/2 duty Square wave.

(2)High Temperature

The part shall be capable of with standing a storage temperature of +85℃ for 96 hours.

(3)Low