Delivery Time:30 days
Certification:ISO/CE
Number of axes: 3 / 4 / 5 axis. Table size: 800*500 mm. Type: CNC Vertical Machining Center, VMC machining center. Spindle speed: 50-10,000 rpm. Guideway Type: Linear Guide Way. Spindle Type: Belt Driven Spindle. System: MITSUBISHI / FANUC Controller. Function: Heavy Cutting, Milling, Drilling and Tapping, High Speed Madding And Engraving. Dimension (L*W*H): 2,200x2,260x2,600 mm.

High Milling Precision Heavy Duty CNC Machining Center

Featured with:

Full guarding: The sealed roof complies with environmental requirements ensuring oil mist during the processing won’t bring air pollution to the workshop. Spindle cooling system: Research show that spindle cooling system can well protect the spindle during fast speed rotation or long time processing from generating too much heat. Oil-water separator: This separator ensures that lubricating oil and cutting fluid can be separated to keep cutting fluid clean. This can also prolong service time of the cutting fluid and help the work piece surface clean and bright.

The H series have a strong ability in all linear guide way series. The HS-650H is based on an effective principle of delivering customer value combined with high production output. This goal is achieved by spindle speeds of 10,000 rpm, high rapid traverse speeds of 48m/min. and a 16/24 tool magazine with a double gripper for tool exchange times of 1.6 seconds. The sturdy, cast-iron C-frame design ensures maximum rigidity and provides the basis for high milling precision. Digitally controlled drives combined with linear guide ways lead to short positioning times with the highest degree of precision. CNC controls with your choice of Mitsubishi or Fanuc, allow you to finish your work piece in the shortest possible time.

Table Size: 800*500mm

Travel of X/Y/Z:  600*500*500 mm

Rapid Traverse X/Y/Z:  48/48/48 m/min

Spindle Speed:  10,000 rpm (Belt Driven)

Specifications:

Item	HS-650H	Unit
X Axis Travel	600	mm
Y Axis Travel	500	mm
Z Axis Travel	500	mm
Table Size	800x430	mm
T-slot Size	4x18x97	mm
Max. Load on Table	400	kg
Spindle Taper	BT-40	#
Spindle Speed	50-10,000	rpm
Spindle Nose Table Surface	100-600	mm
Spindle Center to Column Surface	540	mm
Spindle Power	7.5(11)	kw(HP)
Spindle Torque	47.7	N.M
X/Y Axis Rapid Traverse	48,000/48,000	mm/min
Z Axis Rapid Traverse	48,000	mm/min
X,Y,Z Feed Rate of Cutting	1-10,000	mm/min
3 Axis Motor Power	2/2/3.5	kw
Max. Tool Weight	7	kg
MAX. Tool Length	300	mm