Delivery Time:30 days
Certification:ISO/CE
Type: CNC Vertical Machining Center, VMC machining center. Guideway Type: Linear Guide Way. Number of axes: 3 / 4 / 5 axis. Table size: 1,200*600 mm. Spindle Type: Belt Driven Spindle. System:  MITSUBISHI / FANUC Controller. Spindle speed: 50-8,000 rpm. Function: Heavy Cutting, Milling, Drilling and Tapping, High Speed Madding And Engraving. Dimension (L*W*H): 3,200x2,600x3,200MM

MITSUBISHI / FANUC CNC Vertical Machining Center, 3 Axis Belt Driven Spindle

The H series have a strong ability in all linear guide way series. The HS-1066H is based on an effective principle of delivering customer value combined with high production output. This goal is achieved by spindle speeds of 8,000 rpm, high rapid traverse speeds of 48m/min. and a 16/24 tool magazine with a double gripper for tool exchange times of 1.6 seconds. The sturdy, cast-iron C-frame design ensures maximum rigidity and provides the basis for high milling precision. Digitally controlled drives combined with linear guide ways lead to short positioning times with the highest degree of precision. CNC controls with your choice of Mitsubishi or Fanuc, allow you to finish your work piece in the shortest possible time.

1060H is a machine model between 1060 and 1060HE. The speed of the spindle and the traverse of 3 axis is faster than 650, and it is stronger than 1060HE.

Featured with:

Full guarding: The sealed roof complies with environmental requirements ensuring oil mist during the processing won’t bring air pollution to the workshop. Spindle cooling system: Research show that spindle cooling system can well protect the spindle during fast speed rotation or long time processing from generating too much heat. Oil-water separator: This separator ensures that lubricating oil and cutting fluid can be separated to keep cutting fluid clean. This can also prolong service time of the cutting fluid and help the work piece surface clean and bright.

Table size: 1,200*600mm

Travel of X/Y/Z: 1000*600*600 mm

Rapid traverse X/Y/Z: 36/36/30 m/min

Spindle speed: 8,000 rpm (Belt driven)

Specifications:

Item	HS-1066H	Unit
X Axis Travel	1,000	mm
Y Axis Travel	600	mm
Z Axis Travel	600	mm
Table Size	1,200x600	mm
T-slot Size	4x18x125	mm
Max. Load on Table	600	kg
Spindle Taper	BT-40	#
Spindle Speed	50-8,000	rpm
Spindle Nose Table Surface	100-700	mm
Spindle Center to Column Surface	660	mm
Spindle Power	11(15)	kw(HP)
Spindle Torque	70	N.M
X/Y Axis Rapid Traverse	36,000/36,000	mm/min
Z Axis Rapid Traverse	30,000	mm/min
X,Y,Z Feed Rate of Cutting	1-10,000	mm/min
3 Axis Motor Power	3/3/3	kw
Max. Tool Weight	7