Delivery Time:30 days
Certification:ISO/CE
Type: 3 Axis Machining Center, Vertical Machining Centers Guideway Type: Linear Guide Way Spindle Type: High Speed Direct Driven Spindle System: MITSUBISHI / FANUC Controller Dimension(L*W*H): 2500x2150x3100 mm Power(W): 7.5 KW / 11KW Table Size: 1,000*500mm Travel of X/Y/Z: 800*500*500 mm Rapid Traverse X/Y/Z: 48/48/36 m/min Max. Loading of table: 450 kg Spindle Speed: 10000-24000 rpm

11KW High Speed Direct Driven Cnc Vertical Machining Center,1000*500mm

Featured with:

Full guarding: The sealed roof complies with environmental requirements ensuring oil mist during the processing won’t bring air pollution to the workshop.

Spindle cooling system: Research show that spindle cooling system can well protect the spindle during fast speed rotation or long time processing from generating too much heat.

Oil-water separator: This separator ensures that lubricating oil and cutting fluid can be separated to keep cutting fluid clean. This can also prolong service time of the cutting fluid and help the work piece surface clean and bright.

The HS-850HD is small size machine with enhanced fast speed processing ability. This goal is achieved by spindle speeds of 10,000-24,000 rpm, high rapid traverse speeds of 48m/min-60m/min. and 24 tool magazine with a double gripper for tool exchange times of 1.6 seconds. The sturdy, cast-iron C-frame design ensures maximum rigidity and provides the basis for high milling precision. Digitally controlled drives combined with linear guide ways lead to short positioning times with the highest degree of precision. CNC controls with your choice of Mitsubishi or Fanuc, allow you to finish your work piece in the shortest possible time.

Specifications:

Item	HS-850HD	Unit
X Axis Travel	800	mm
Y Axis Travel	500	mm
Z Axis Travel	500	mm
Table Size	1,000x500	mm
T-slot Size	5x18x105	mm
Max. Load on Table	450	kg
Spindle Taper	BT-40	#
Spindle Speed	50-12,000/15,000	rpm
Spindle Nose Table Surface	110-610	mm
Spindle Center to Column Surface	550	mm
Spindle Power	7.5(11)	kw(HP)
Spindle Torque	47.7	N.M
X/Y Axis Rapid Traverse	60,000	mm/min
Z Axis Rapid Traverse	48,000	mm/min
X,Y,Z Feed Rate of Cutting	1-10,000	mm/min
3 Axis Motor Power	1.5/1.5/2	kw
Max. Tool Weight	7	kg
MAX. Tool Length	300	mm
Max. Tool Diameter	75/150	mm
Positioning Precision