Introduction:

Cone Crusher is widely used for secondary and fine crushing in the fields of mining, chemical industry, building materials, metallurgy and so on. It can crush materials in middle and high hardness such as ironstone, copper ore, limestone, quartz, granite, rock and so on. The standard type (PYB) is applied to secondary crushing; the medium type (PYZ) and the short-head (PYD) are applied to fine crushing.

Advantages:

1)High-efficacy: the moveable shaft will continuously rotate ,and the materials crushing and the discharging process will take place in turn along the working surface .

2)Convenient operation and maintenance: The machine adopts the secondary vibration isolation technology so that the basic vibration is slight ,which features the convenient operation and low cost.

3)High-quality: The final products feature even size, and cubic shape .And the flexible cone wears evenly relatively.

4)The adoption of dry oil and water, prevents the dust from entering the machine body .This two kinds of sealing ensures the cleaning of the lubrication boiled oil and extends the service life of the slide bearing, which ensures that the machine can obtain a smooth function.

Working Principles:

The spring cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fabricated gear, and the wheel of the conveyor belt is drived by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole consequently the output size is determined.

Technical Parameter: