Detailed Product Description

Glass machine:
Flat and bent glass tempering
For normal, low-e glass, coated glass
Glass size:2000 x2500mm
Lengthway bent

Glass machine

 

Advantage:

• High product quality

Opposite roll pressing, mechanical position location and accurate forming smooth without press mark.

• Easy operation

Glass curve is automatically controlled by computer without any mould.

• Low Energy consumption

The energy consumption of this machine is very low with good thermal insulation and reasonable energy saving.

 

Application:

      The glass bending tempering machine can process flat and bent tempering glass on the same machine. With human friend interface Beckhoff controller, all processing data can be input and set on computer which greatly facilitate production. We have many types of glass bending/tempering machine for different size of glass and output.

 

Machine specification

Machine dimension: Length: 15m Width: 2.4 m Air collection room: 40m²

Glass size:

l  Max. glass size: 2000 x 2500mm (Bent) (Lengthways bending)

l  Max.glass size: 2000x3600mm (Flat) 

l  Minimum size of the glass: 450 × 600 mm 

l  Glass thickness range: 5 to 19 mm (Flat)

l  Glass thickness range: 8 to 12 mm (Bent)

Quality standard:GB9963

Finished parts qualification rate: ≥96%

Output: 15 lots per hour, assuming 5mm glass

Total power: 680KW,

Power Consumption: ≤6 degrees (use10mm glass calculate)

 

Machine main components:

       The tempering furnace is consisted by loading table, heating furnace, tempering cooling device ,unloading table, wind motor, wind blowing system ,electric control cabinet and computer control terminals. For bending and tempering furnace, an additional bending and cooling cabinet is assembled for glass bending.