Detailed Product Description

Glass machine:
Flat and bent glass tempering
Glass size: 2400x3600mm
Thickness: 6-19mm

Glass machine:

 

Advantage:

 

High product quality

Opposite roll pressing, mechanical position location and accurate forming which is smooth without press mark.

 

Easy operation

Glass curvation is automaticlly controlled by computer without any mould.

 

Low Engergy consumption

The energy consumption of this machine is very low with good thermal insulation and reasonable energy saving.

 

Application:

 

The glass bending tempering machine can process tempered glass and bending & tempering glass on the same machine. With human friend interface Beckhoff controller, all processing data can be input and set on computer which greatly facilitate production. We have many types of glass bending/tempering machine for different size of glass and output. Below information is for our glass type YD-FB-2442:

 

Machine dimension:

Length: 21 m

Width:3.5 m

Force wind room: 40-60 square mete

Glass size:

Max. glass display size: 2440 x 4200mm

Minimum size of the glass: 300 × 150 mm 

Glass thickness range: 5 to 19 mm

Quality standard:GB9963

Finished parts qualification rate: ≥96%

Output: 70 square meter/hour, (Assuming loading rate 85%, 10mm clear glass)

Total power:880KW, among them:

Power for heating system: 600KW

Force fan: 280KW + 22KW

Power Consumption: ≤6 degrees (use10mm glass calculate)

Machine main components:

The tempering furnace is consisted by loading table, heating furnace, tempering cooling device ,unloading table, wind motor, wind blowing system ,electric control cabinet and computer control terminals. For bending and tempering furnace, an additional bending and cooling cabinet is assembled for glass bending.