Product Details

Description:
The hammer crusher also named hammer mill. Hammer Crusher is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture such as barite, limestone, terrazzo, silica sand stone, coal, coke, gypsum, aluminum sulfate, slag, salt, chalk, blocks, cement, alumen, brick, tile, etc.
Working principle:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement
Main technical parameters:

Model	Type	Rotor diameter (mm)	Discharging size (mm)	Capacity (m3/h)	Motor	weight(t)	Dimensions (L×W×H)(mm)
Power(kw)
Single-stage hammer crusher	PCΦ400×300	≤200	≤25	5-10	11	0.8	900×670×860
PCΦ600×400	≤250	≤30	10-22	22	2.26	1200×1050×1200
PCΦ800×600	≤250	≤35	18-40	55	4.8	1310×1180×1310
PCΦ1000×800	≤350	≤35	25-50	75	5.9	1600×1390×1575
PCΦ1000×1000	≤350	≤35	30-55	90	8	1800×1590×1775
PCΦ1250×1250	≤350	≤35	35-65	132	14	2060×1600×1890
PCΦ1400×1400	≤350	≤35	50-100	280	32	2365×1870×2220
PCΦ1600×1600	≤350	≤35	100-150	480	37.5	3050×2850×2800

New Products

cooking oil centrifugal oil filter price from China
USD $1000 - $5000 /Set

1 Set(MOQ)
Overflow type ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
Limestone ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
Wet ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
Dry ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
Mineral ball mill
USD $1 - $50000 /Set

1 Set(MOQ)

Intermittence ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
Steel slag ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
Cone ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
Silicate ball mill
USD $1 - $50000 /Set

1 Set(MOQ)
double roller crusher
USD $2000 - $10000 /Set

1 Set(MOQ)
Heavy hammer crusher/stone hammer crusher
USD $1000 - $10000 /Set

1 Set(MOQ)