Rotary encoder, Absolute encoder/sensor,Magnetic encoder,OEM,Customized

Product overview:

Inteligent rotary encoder is one of the most commonly measurement components in the area of industrial automation. It mainly used in the electric motor and various automation equipment to detect angle-position and measure speed.

We provide various industrial standard increment encoders such as open-collector,push pull output.long-distance drive and so on,which can connect most frequency converters and interface cards.

We also provide absolute encoder such as SSI,RS232,RS 485,PI,gray code,binary,multi-circle and so on. For the detail info,please contact sales department.

 

Mechanical parameter:

Parameter Value Unit Remark

Quality <180 g except wires

Working temperature -40~85 degree

Store temperature -50~125 degree

Protection grade IP55 excellent resistance of water, oil and dust ability;allowing condensation,max IP68

Anti-vibration <600 m/s2 55-2000Hz

Anti-shock <4000 m/s2 Impact 6ms, allowing strike lightly during installation

Starting toque <6*10-3 Nm 20degree

Rotor inertia <3*10-6 kgm2

Max shaft load 60 N radial direction

80 N axial direction

Axial movement <±1.5 mm measured axial

Mechanical speed <16000 rpm

 

Electrical parameter

 

Model XYK-BMJ-38Z6-X13

Items Value

Supply voltage 5-24(V)

Current consumption 20mA

Boad rate 9600 bit/s

Resolution 13bit

Angle scope 0-360 deg

Data updating 2ms

Kernel temperature sensor is optinal

 

Electrical specification

Comply RS485

 

Data format(default):

Data contains six bytes: AAH BBH, IDH 00H DATAH DATAL. Each data packet begins with AAH BBH,by which the user can judge the beginning of this data package.The third byte is the sensor address (ID), followed by a byte reserved. The last two bytes are angle data, while the high byte in the former, the low byte in the latter. The low 14 bits is effective digital, with a data range: 00H 00H ---- 3FH FFH, corresponding angle is 0.000 deg- 359.999 deg.Frame format: data bits 8, start bit 1, stop bit 1, no parity.

 The communication is divided into broadcast mode and master-slave mode, the default mode is broadcasting, its baud rate is 9600bps.

 Master-slave mode: Host sends 6 bytes: AAH BBH, IDH the CCH the CCH, the CCH, the slave responses.

 Data format and frame format can be customized according to your requirement.