Needle-flame Tester

Product details:Model ZLT-ZY2.

The ZLT Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator.

SPECIFICATIONS

::::::::::::::::::Basic introduction::::::::::::

1. Comply with IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005.
2. With predetermined size (Φ 0.9 mm) needle burner, in 45 °angle burning product,measure the fire risk by  product light-off or holde burning time .
3. Used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector  such as electrical and electronic equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics.

::::::::::::Technical parameters::::::::::::

1.  Needle burner:inner hole diameter  Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length  ≥ 35mm, stainless steel
2.  Burner angle:45 ° or vertical (adjust flame height)
3   Burning time: 0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
4.  Hold burning time: 0-999.9 s ±0.1 s, automatic recording, manual timeout
5.  Flame height: 12mm ± 1mm (with height measurement instruments)
6   Flame gas: 95% butane gas (can use bottled lighter gases)
7.  Temperature test range: 0 ~ 1000 °C
8.  Flame temperature requirements: from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
9.  Thermocouple: Φ 0.5 mm import armoured thermocouple type (K)
10. Test background: black background
11. Test process: automatic control, independent convulsions
12. Consult standard: IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005
13. Studio volume: 0.5 cubic, stainless steel box (according to customer requirements 0.75 cubic or a cubic)
14. Size: W*D*H=1100mm*550mm*1100mm

 ::::::::::::::::::Main place of origin or brand instruments Accessories::::::::::::::::::

1. thermocouples: φ0.5 Type K (Ni/Cr - Ni/Al). (UK RS imported).      

2. digital instrument: the use of imported Korean autonics (Autonics) display. (temperature control table, counters, timers)                                  

3. Integral inlet ignition system, combustion delay of only 0.1 seconds.

4. Box full of stainless steel (1.2 thick 304 stainless steel plate).   

5.Relay:Omron                                                                                                             6. breakers:Schneider 

7. button, switch, indicator: Shanghai Tin Yat                       

8. Wire: Guangzhou Wire.