Specifications:

GS Series Helical Worm Gear Motor through carbonization quenching, grinding by Okuma imported from Japan and Niles imported from German. Output shaft are vertical to input shaft, it consists of single stage helical gears and single worm gear .output shaft is vertical to input shaft; consist of each one stage helical gears&worm gears. There are many installation means such as flange, foot-hollow output shaft.

Main features:

1. High modularization design: can equip with various motors or other power input conveniently. The same machine type may equip with various power motors. It is easy to realize the combination and junction between every machine type.

2. Mounting arrangement: no strict limitation

3. ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.

4. High strength, compact: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.

5. High efficiency: the efficiency of gear unit can reach 95%, the efficiency of worm gear unit can reach 89%.

6. Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.

7. Low noise: Because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low.

8. Large radial loading ability.