MB- Artesian Terrace Material
Negotiable /Unit
Min.Order:1 Unit
Guangzhou Mebong Architectural Decoration Co., Ltd.
1, good leveling performance, can level a smooth surface; bond strength with the surface
2, long time for opening, the later hardness gains quickly and easy for the later operation
3, high flexural strength, high anti-pressure strength; low line shrinking rate, can overcome the crack caused by artesian terrace
Application:
Can be used as the leveling treatment for epoxy, polyurethane floor, sheet, plastic floor, high-level wood floor; the base layer for modern electric factory with no static no dust, hard terrace; the base layer for factory anti-alkali and anti-wearing terrace; old floor for retreat
Operation Process:
1, the surface should be clean and dry with no dust, no grease, for the parcel potholes defects, wipe out the sharp things, and make the surface smooth
2, before the base treatment wet the surface, without obvious water. Using the artesian terrace material to spray on the surface, make sure no left, after the first time dry continue the second time
3, mix the material with water at the rate of 1: 0.24 (25kg/bag + 6kg water), put it aside for 3-4min then stir it for 1min, pouring the mixed mortar on the base layer and let it flow, for the corner, using scraper to scrap it throughout the surface, for the foaming place, deflated cylinder to clean the foam, control the time with 30min.
Technical Reference:
performance |
Requirement |
Diffusance (CSTB:d=30,h=50mm) |
150-140mm, 0, 5, 10, 15 min |
Usage period |
25~35 min |
The concentrate time, the final setting time |
Concentrate≤140min, final setting ≥200min |
Flexural strength( 28 days) |
≥5MPa |
Anti-pressure strength (28 days) |
≥25MPa |
Tensile bond strength to concrete (28 days ) |
≥1MPa |
Shrinking and extension |
≤0.1% |
Cautions:
1, control the operating time from the stirring
2, during the usage period if the terrace surface generates any bubbles, defoaming treatment must be carried out to ensure the surface quality after construction
3, the material that over the usage period cannot be used again , or diluted with water for second use.
Store Method:
Store in cool and dry place, unopened product can be saved at least half year, avoid caking caused by over stacked.
Packing:
25kg/barrel