Features:      

1, this product is a new type strong adhesive,

2, the adhesive has certain thixotropic, can finish the adhesion and gap filling at the same time, convenient and save time

3, good water resistance function and anti-aging

4, environmental friendly, non-toxic

5, good anti-infiltration function

Surface Treatment:

1, the substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.

2, the substrate surface should has certain firmness, and requiring basic smooth and vertical rate

Operation Process:

1, the ratio: MB general tile adhesive: water: 3.3: 1mixed and stirred into paste, put it aside for a few minutes and then a little stirring to gain the better effect

2, using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m², then scrap the adhesive on the backside of paper ceramic tile or mosaics, then adhere the mosaics on the surface and pat evenly.

Technical Reference:

Cautions:

1, check the situation of the surface before operation

2, operating under 5℃~40℃ situation

3, during summer, above 40℃, cooling the surface, so as to avoid the influence by the loosing water  

4, never mix the dry slurry with water and use again

5, finished after 24h, can be make the next process

Store Method:

Store in cool and dry place, unopened product can be saved for one year.

Packing:      

25kg/bag, 5kg/bag