1.Line array speaker with all neodymium driver
2.3-way line array speaker system
3.good after-sale service
4.clear sound

DESCRIPTION and APPLICATION
W-312A is a line array speaker which is made of one 12'' neodymium housed in bandpass box to deliver ultra powerful bass driver, two 6.5'' neodymium midrange speaker units of well-designed of waves phase horn loading technique, two 3''  titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-312A is a compact line array enclosure designed to bring superb line array performance to large stadiums, big outdoor concerts and commercial events. It meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installations. W-312A may be used without subwoofers in many applications.It may also be complemented by ground stacked subwoofers CVR S-218/CV-218B

Model	W-312A
Type	Line array system
Frequency Response	45Hz-20KHz±3dB
Directivity index(Dl)	12(±2)1.2KHz-16KHz
Power handing	LF 500W(RMS)1000W(PEAK)
	MF 300W(RMS)600W(PEAK)
	HF 200W(RMS)400W(PEAK)
Sensitivity	LF 104dB(1W1M)
	MF 107dB(1W1M)
	HF 111dB(1W1M)
MaxS.P.L	LF 131dB(PEAK/1M)
	MF 132dB(PEAK/1M)
	HF 134dB(PEAK/1M)
LF section	1×12 (310mm)neodymium woofer
	75mm(3in)coil
Nominal impedance	8 ohm
MF section	2×6.5''(170mm)neodymium MF
	50mm(2in)coil
Nominal impedance	16 ohm
HF section	2×3"neodymium compression driver
	with 72mm titanium diaphragm
Nominal impedance	16 ohm
Output section	3-channel
Dispersion pattern	110°H×7°V
Finish	Water-proof,wear-resistant textured black paint
Array design	Arrays of less than 3×W-312A will
	provide poor dispersion control and
	are neither recommended nor supported
Speaker cables	LF 1(+)1(-) MF 2(+)2(-) HF 3(+)3(-)
Rigging system	Please refer to the W-312A user
	manual before any operation
Input connectors	2×Neutrik Nl8
Recommend crossover	LF 45Hz-400Hz
	MF 400Hz-1800Hz
	HF 1800Hz-20KHz
Dimensions	1116×395×530mm(W×H×D)
Package dimensions	1190×470×600mm/0.34cbm
Enclosure	Birch plywood
Net weight	62kg
Gross weight	66kg