Applications： 

The N probes measure the thickness of non-conductive coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.

* Specially for the thickness measurement of coating on small workpiece.

* Measuring methods:  eddy current (N).
* Two measurement mode: Single and Continuous（Notice：Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.）
* Metric/imperial system selectable.

* Manual or automatic shut down.

* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use “USB data output” and “RS-232 data output” to connect with PC.

* Provide “Bluetooth data output” choice.

* Separate Type, measurements can be more flexibility. 

Operating Principle :  Eddy Current (NF) 

 Measuring Range :  0~200 um / 0~8 mil 

 Resolution:   0.1 um 

 Min. Radius Workpiece :  convex 2 mm / concave 4 mm 

 Min. Measuring Area:   2 mm 

 Min. Sample Thickness :  0.1 mm 

 Accuracy :  ± 1~3%n or ± 2.5 um  

 Auto Power Off   

 Metric / Imperial  : Convertible 

 Battery Indicator :Low Battery Indicator 

 Operating Conditions :  Temp. 0~40 °C, Humidity: 10~90 %RH 

 Power Supply  : 4 x 1.5 V AAA (UM-4) Battery 

 Dimensions :  140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch ) 

 Weight :  215 g (Not Including Batteries) 

Standard Accessories:

 1. Main Unit

 2. Probe (NF Type)

 3. Calibration Base Set (NF Type) CTG-BS

 4. Calibration Foils CTG-CF (1 set, 4 pieces)

 5. Carrying Case

 6. Operation Manual

Optional accessories:

 1. USB, RS-232C data cable with software
 2. Bluetooth data out put with software