Micro Coating Thickness Meter CM-1210-200F 0~200 um / 0~8 mil (F Type, Micro Coating)
USD $290 - $450 /Piece
Min.Order:1 Piece
Guangzhou Landtek Instruments Co.,Ltd
Applications:
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc
* Specially for the thickness measurement of coating on small workpiece.
* Measuring methods: magnetic induction (F). .
* Two measurement mode: Single and Continuous(Notice:Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth data output” choice.
* Separate Type, measurements can be more flexibility.
Operating Principle magnetic induction (F).
Measuring Range 0~200 um / 0~8 mil
Resolution 0.1 um
Min. Radius Workpiece convex 2 mm / concave 4 mm
Min. Measuring Area 2 mm
Min. Sample Thickness 0.1 mm
Accuracy ± 1~3%n or ± 2.5 um
Auto Power Off
Metric / Imperial Convertible
Battery Indicator Low Battery Indicator
Operating Conditions Temp. 0~40 °C, Humidity: 10~90 %RH
Power Supply 4 x 1.5 V AAA (UM-4) Battery
Dimensions 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch )
Weight 215 g (Not Including Batteries)
Standard Accessories:
1. Main Unit
2. Probe (F Type)
3. Calibration Base Set (F Type) CTG-BS
4. Calibration Foils CTG-CF (1 set, 4 pieces)
5. Carrying Case
6. Operation Manual
Optional accessories:
1. USB, RS-232C data cable with software
2. Bluetooth data out put with software