Product Details

Cheap import china products of artificial grass for wedding decoration

SPECIFICATION
Model:	G001
Pile height:	7MM
Gauge:	5/32inch
Dtex:	2500
Yarn Type:	monofilament
Yarn Material:	PP
Stitches rate:	23 stitches/10 CM
Density:	62400
Backing:	PP

Description:

import china products artificial grass for wedding decoration model G001 , , monofilament grass yarn type and yarn material is PP . The backing material is PP+None woven. The pile height , density , backing and Dtex are all as customer order.

Many different kinds backing , PP, PP+Nonewoven, PP+ net, net, PP+Nonewoven+net.

Description: High duribility and elastisity, clean, soft, you could touch my your hand,walk on it and also sleeping on it. Far away from the noisy work city, enjoying yourself in the nature enviroment.

Description: From now on, we have CE certification,ISO9001,ISO14000, SGS and VOA.

Packaging

Description: You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs.

Installing Decoractive Artificial Grass onto Concrete or Permanent Base

1. First of all assess how much import china products artificial grass for wedding decoration you will need. Note: We manufacture rolls in 2 widths: 2 metres (6 feet 6 inches) or 4 metres (13 feet 1 inch) .

2. Make sure that the surface to be covered is clean and smooth ready to receive the import china products artificial grass for wedding decoration .A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products.

3. Lay the import china products plastic mat for kindergarten to trim off to make that perfect edge in doorways or up a wall. Leave for around 2 to 3 hours to settle. This helps stop any wrinkling or creasing.

4. Cut and trim your import china products artificial grass for wedding decoration , using a sharp Stanley knife making sure are no gaps between walls and artificial grass for wedding decoration .

5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue should be used.

6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking care not to over fill the surface. Note: Application of sand is best on a dry day. Remember that the infill

will eventually compact so you should consider adding a final layer when settled.

7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and import china products artificial grass for wedding decoration tacks can be used.