Product Details

Packaging & Shipping

Packaging Detail:	4*25m/roll about 3000 sqms/20 container about 7000sqms/40 container
Delivery Detail:	about 7-10 days

SPECIFICATION
Model:	G021
Pile height:	10MM
Gauge:	5/32inch
Dtex:	3300
Yarn Type:	monofilament
Yarn Material:	PP
Stitches rate:	19.5 stitches/10 CM
Density:	62400
Backing:	PP

Description:

Wedding/catering flooring decor artificial turf model G021 , bi colors with CE certification , monofilament grass yarn type and yarn material is PE . The backing material is PP+None woven . The pile height , density , backing and Dtex are all as customer order.

Description: Many different kinds backing, PP,PP+Nonewoven, PP+ net, net, PP+Nonewoven+net.

Description: High duribility and elastisity, clean, soft, you could touch my your hand,walk on it and also sleeping on it. Far away from the noisy work city, enjoying yourself in the nature enviroment.

Description: From now on, we have CE certification,ISO9001,ISO14000, SGS and VOA.

Description: You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs.

Loading Quantity

20 GP

about 2200-2500 sqm

40 GP

about 4500-4600sqm

40 HQ

about 4600-5000sqm

Installing Decoractive Artificial Grass onto Concrete or Permanent Base

1. First of all assess how much wedding/catering decor artificial grass you will need. Note: We manufacture rolls in 2 widths: 2 metres (6 feet 6 inches) or 4 metres (13 feet 1 inch) .

2. Make sure that the surface to be covered is clean and smooth ready to receive the wedding /catering decor artificial grass .A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products.

3. Lay the wedding/catering decor artificial grass to trim off to make that perfect edge in doorways or up a wall. Leave for around 2 to 3 hours to settle. This helps stop any wrinkling or creasing.

4. Cut and trim your wedding/catering decor artificial grass , using a sharp Stanley knife making sure are no gaps between walls and artificial grass .

5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue should be used.

6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking care not to over fill the surface. Note: Application of sand is best on a dry day. Remember that the infill

will eventually compact so you should consider adding a final layer when settled.

7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and wedding/catering decor artificial grass can be used.