Product Details

SPECIFICATION
Model:	Z104
Pile height:	40MM
Gauge:	3/8inch
Dtex:	12500
Yarn Type:	monofilament
Yarn Material:	PE+PP
Stitches rate:	16 stitches/10 CM
Density:	16800
Backing:	PP + none woven cloth

Description:

Landscape equipment artificial landscape grass model Z104 , 4 color with CE certification , fibrillated grass yarn type and yarn material is PE . The backing material is PP+None woven. The pile height , density , backing and Dtex are all as customer order.

Description: Many different kinds backing , PP , PP+Nonewoven, PP+ net , net , PP+Nonewoven+net.

Description: High duribility and elastisity, clean court make you love in playing football very much. This model is suitable to 5 people side,7 people side,11 people side football field and also mini-football field.

Description: From now on, we have CE certification,ISO9001,ISO14000, SGS and VOA.

Description: You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films, etcs.

Loading Quantity

20 GP

about 3600-4000 sqm

40 GP

about 7000-8000 sqm

40 HQ

about 9000-10000sqm

Installing Artificial Grass onto Concrete or Permanent Base

1. First of all assess how much artificial landscape grass you will need. Note: We manufacture rolls in 2 widths: 2 metres (6 feet 6 inches) or 4 metres (13 feet 1 inch) .

2. Make sure that the surface to be covered is clean and smooth ready to receive the artificial landscape grass. A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products.

3. Lay the artificial landscape grass to trim off to make that perfect edge in doorways or up a wall.Leave for around 2 to 3 hours to settle. This helps stop any wrinkling or creasing.

4. Cut and trim your artificial landscape grass using a sharp Stanley knife making sure are no gaps between walls and artificial landscape grass.

5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue

should be used.

6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking care not to over fill the surface.

Note: Application of sand is best on a dry day. Remember that the infill

will eventually compact so you should consider adding a final layer when settled.

7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and artificial landscape grass tacks can be used.