Product Details

Landscaping artificial grass carpet 35mm thick

Specification

1)Artificial grass for landscaping
2)Long life & Evergreen
3)Eco-friendly
4)No weather limited
5)Easy Maintenance

SPECIFICATION
Model:	Z126
Pile height:	35MM
Gauge:	3/8inch
Dtex:	10000
Yarn Type:	monofilament
Yarn Material:	PP+PE
Stitches rate:	16 stitches/10 CM
Density:	16800
Backing:	PP+Net

Product Description

Description:

Decorative landscaping artificial grass carpet model Z126 ,PP+PE fabric apple green with CE certification .Monofilament grass yarn type and yarn material is PP.The backing material is PP+None woven.The pile height , density , backing and Dtex are all as customer order.

Package & Shipping

Description: Many different kinds backing, PP,PP+Nonewoven, PP+ net, net, PP+Nonewoven+net.

Description:

PP fabric artificial grass for mini golf china artificial grass depot

High duribility and elastisity, clean, soft, you could touch my your hand,walk on it and also sleeping on it. Far away from the noisy work city, enjoying yourself in the nature enviroment.

Description: You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs.

Installing Decoractive Artificial Grass onto Concrete or Permanent Base

1. First of all assess how much decorative landscaping artificial grass carpet you will need. Note: We manufacture rolls in 2 widths: 2 metres (6 feet 6 inches) or 4 metres (13 feet 1 inch) .

2. Make sure that the surface to be covered is clean and smooth ready to receive the decorative landscaping artificial grass carpet.A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products.

3. Lay the decorative landscaping artificial grass carpet to trim off to make that perfect edge in doorways or up a wall. Leave for around 2 to 3 hours to settle. This helps stop any wrinkling or creasing.

4. Cut and trim your decorative landscaping artificial grass carpet, using a sharp Stanley knife making sure are no gaps between walls and decorative landscaping artificial grass carpet.

5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue

should be used.

6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking

care not to over fill the surface. Note: Application of sand is on a dry day. Remember that the infill

will eventually compact so you should consider adding a final layer when settled.

7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and decorative landscaping artificial grass carpet tacks can be used.