G031 the real slap-up green grass	Type  G031 the real slap-up green grass
	Pile height  15MM
	Gauge  3/16inch
	Sitch rate  20needle/10CM
	Density  42000
	Bottom  single compound
	DTEX  4000
	Weight  2.4KG/sq.m
	Roll  4*25m/roll 2*25m/roll
	Package  PP Mesh belt
	Containers  20  GP(3500-3800sq.)   40GP(7500-7800sq.)
	Application  golf  course special  ,as well as G013

Installing china wholesale synthetic grass golf green  onto Concrete or Permanent Base

1. First of all assess how much china wholesale synthetic grass golf green you will need. Note: We manufacture rolls in 2 widths: 2 metres(6 feet 6 inches) or 4 metres (13 feet 1 inch) .

2. Make sure that the surface to be covered is clean and smooth ready to receive the china wholesale synthetic grass golf green .A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products. 
 
3. Lay the china wholesale synthetic grass golf green  to trim off to make that perfect edge  in doorways or up a wall. Leave for around 2 to 3 hours to settle. This helps stop any wrinkling or creasing. 
 
4. Cut and trim your china wholesale synthetic grass golf green , using a sharp Stanley knife making sure are no gaps between walls and football gras

5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue should be used. 
 
6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking care not to over fill the surface. Note: Application of sand is best on a dry day. Remember that the infill will eventually compact so you should consider adding a final layer when settled.

7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and china wholesale synthetic grass golf green tracks can be used.