Product Details

Best quality nylon monofilament yarn putting green carpets golf mat carpet tiles

Model No.:	Pro205
Uses :	Golf
Pile Content:	U.V. Resistance Polyethlylene Monofilament yarn
Yarn Count(Dtex):	4400
Yarn Height(mm):	10(+-5%)
Machine gauge :	5/32inch
Tufts per Meter(LM):	320s
Tufts/m²:	80640
Yarn Weight(g/m²):	713
Drainage hole diameter(mm):	5
Holes / m²:	50
Total Weight(g/m²):	1913
Primary Backing:	UV Resistant PP 148g/m²
Secondary Backing:	UV Resistant (PP) 90g/m²
Coating backing:	Latex+rubber,Spundbondon Styrene-Butadiene Basia, 700g/m²
Grade of fire resisted:	DIN 51960 Class 2 flammable
Osmosis:	1600L/H/M²
Total height(m):	13
Roll Width(m):	4,2,1
Roll diameter(cm):	If length is 25m(40-50)
Installation:	Without rubber and sand
Colors:	Green
Backing Fabric:	PP+NET(PP+NONWOVEN)
Guarantee years:	8 years

Advantage

Compared with football filed natural grass,artificial grass carpet have many advantages,

bright appearance in artificial grass carpet,
long useful time(warranty period:8-10years)
low maintenance cost(less than 5% of natural grass)
good water permeability
good wear resistance,all-weather use
good UV-resistance.
easy to install

Packaging & Shipping

Grass Installation

Artificial Grass Installation

Installation

Learn how to design and build your very own artificial grass landscape.

Excavation and Base Construction

Remove old sod/dirt to a depth of 4″. Lay down landscape fabric over entire project area. Place 2″ of 3/4″ road base over entire area, rake evenly, water thoroughly and compact with plate tamper (compactor). Place another 2″ of ¾” road base over project area, rake evenly, water thoroughly, and compact. Be sure there are no low spots within the area of the Artificial Grass.

Surfacing

Lay artificial grass over project area. Preferably keep fibers facing same direction (never opposite direction).

Seaming

Cut off factory excess 2-4 tufts in. Try and line seams up as best as possible. If you have to, cut one piece of turf to the other getting the backing of both pieces as close as possible to one another without overlapping. Lay seam tape half under one piece and half under the other. Fold turf away from seam and pour glue. Spread glue evenly with glue spreader. Let glue get
tacky and lay pieces back down. Be careful not to bury any fibers or get glue on the fibers

.Put seam together like a zipper. Nail the seam every 4-6 inches on both sides with 4-5 inch galvanized spiral spikes. Be sure not to bury any fibers or create any indentations in the base.

Recommended Installation Tools

· Flat Head Shovel(s)

· Wheel Barrow

· Asphalt/Landscape Rake

· Exacto Knife

· Compactor (Plate tamper)

· Rake or Stiff Bristled Broom or Power Broom