Specifications

The Corrugated Paper Production line is composed of the following parts: raw paper holder,heating tunnel,paper splicing unit

  The Corrugated Paper Production line is composed of the following parts: raw paper holder, heating tunnel, paper splicing device,single surface corrugating machine, crane, multi-phase pre-heater, folder gluer machine, dual surface heating and forming machine, line pressing paper dividing machine, traverse cutter, stacking machine and boiler.The raw paper is fed from the raw paper holder, passing through tunnel, where the paper is heated and the moisture inside the paper is adjusted. Then the paper is sent into the Single faced corrugating device and is corrugated and shape-formed, here the single surface corrugated paper is adhered to another paper, forming single surface corrugated paper. After that, by the crane the paper is sent to and re-heated by the multi-phase pre-heater. The glue putting machine puts glue onto the paper, and the glued paper is sent to the dual surface heating and forming machine, at this moment the final corrugated paper is formed and outputted continuously.The formed paper then pass through the cutting paper is stacked, assorted, and counted by the stacking machine, and you will see the final products outputted by this whole line continuously.

Equipment: Main unit. Pulping machine. raw paper stand. horizontal cutting machine. optional according to different requirement:

Paper output speed :200 m/ min..

Production width:1200-2200mm

Heat way: Steam, gas.

Total line length: between 80 to 105m.