CO2 Welding Wire, Mig Welding Wire ER70S-6

Description

Mig welding wire s is a coppered low alloy steel wire with all position welding.The wire has a very good

welding performance and the weld metal shows lower temperature impact toughness. It is mainly for welding structures made by shipping steel and low alloy steel, such as ships , containers, as well as vehicles,engineering

and construction machineries, bridges etc.

Advantages

This ER70s-6 CO2 welding wire has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash, good welding seam. This series of welding wires are suitable for the low

carbon steel and low alloy structure, vehicle, bridge, container, construction machinery, boilers and construction etc.have depositing speed and high efficiency, stable arc, little splash, good welding seam.

*Avaliable mig wire size : 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm

*Packing: 5kg, 15kg, 20kg/roll

Application

Suitable for welding low carbon steel and some low alloyed steel with grade 500MPA and grade D&E steel

for marine  use.  Such as vessels, vehicles, bridges, construction machinery, pressure vessels, construction

and so on.

Main Characteristics 

All position welding, vertical-down ward welding ; Little splash, stable eletric arc and little weld fume; Good removability of slag, beautiful welding seam and can obtain high welding speed

in fillet welding.

Protection gas: 100% CO2

18Equivalent Standard: AWS A 5

 
- Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm

- Chemical composition: C 0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P < =0.025, S < =0.035, Cu < =0.35,

Ni < =0.30, Cr < =0.20
- Weight of spool: 5kg, 15kg and 20kg.

- Packing of welding wire: