Product Details

Specifications

Use clay way to filtering,regenerating used transformer oil

Application:

Series KPH clay transformer oil filtration device use of a special active clay for purifying and regenerating the unqualified transformer oil, switch oil, mutual inductor, it also can be used as absorption unit for treating low viscosity lube oils. Series KPH can remove acid, free carbon, oxides, pigment and particles, it dose not affect insulating oil ingredients and anti-oxidation. Restoring oil dielectric strength, the treated oil is limpidity. It can save 90% cost than replacing of new oil.

KPH is mainly to regenerate the old insulating oil, it remove acid, sludge, oxidation and various of resultant, the treated oil is limpidity and clarity color. After the regenerating process, we suggest to use the vacuum insulating oil purifier to purify regenerated oil, remove the trace water, gas, and tiny particles. Getting more higher dielectric strength.

Index name	unit	KPH-2000	KPH -4000	KPH -8000	KPH -15000
Flow rate	Liters per 8 hours	2000	4000	8000	15000
Ratio of regeneration	%	Above 90
Working pressure	MPa	-0.095 ～ 0.4
Temperature range	°C	40- 80
Acid value		< 0.03mgKOH/g
Water-solubility acid PH		> 5.5(GB/T264)
Flash point(close cup) °C		>135(GB/T261)
Breakdown voltage		40-55
Viscosity	mm²/s (40°C)	11 (cSt) GB/T
Interfacial tension	mN/m	28-35
Water content	ppm	40 - 60
Value of dielectric loss		th(90°C)%< 0.5%
Working noise	dB(A)	≤70
Power supply		380V 50HZ 3PH(As per user’s option)
Heating power	kW	45	95	130	170
Total power	kW	58	110	149	192
Inlet(Outlet)	mm	32	32	42	42
Reactor system	mm	2500x2100x 2300	3000x2100x2300	3300x2100x2300	5600x2100x 2300
Filtration system	mm	3000x1200x 1900	3000x1400x1900	3500x1600x2100	2x3500x1600x2100
Gas treatment system	mm	1360x800x 3000	1360x800x 3000	1560x950x 3000	1560x950x 3000
Weight	kgs	3100	4200	6700	8800