Manufacture Mini Air Pump for Laser Engraving machine
USD $59 - $60 /Set
Min.Order:1 Set
Shenzhen Reliable Electromechanical Technology Co., Ltd.
SCOPE OF USE <<<
This series of pumps is non-Lubrication one,which gives off Very clean air,lt can be used for aquatic breeding,restaurant and live aquatic product keeping,also can be used for food packing,spraying,electronic circuit board welding,Supporting medical equipment,environment equipment,the use of gas stoves,etc..
FEATURES<<
1.Convent to operate without oil,noise and air pollution
2.Cylinders and pistons ae of excellent materials, which is strong and durable and have little wear long time of working
duct specifications,wide adaptation.
4.The structure is compact and innovative modeling,using high-quality materials,advanced manufacturing,small size,light weight.
5,Smooth operation.
6,Energy,gas volume,the ratio of the electromagnetic pump air compressor power is about one-fifth of the traditional structure,a significant energy-saving,low-voltage suitable for only exhaust pressure,the amount of gas occasions.
1,The use of power (voltage and frequency) allow Fluctuations+/-10%,with the power indicated on air pump Nameplate (labels)not too high or too low are normal and extreme damage to the pump.
Wording environmental temperature should within degree andmaintain good Ventilation and smooth to prevent excessive temperature
. Air pump should de prevented from rain drenched and soaked water.Not in the heat of the sun or the dust environment.
Before use it,make sure the earth line is well equipped .Do not touch the power with wet hands
lf it falls into water,pls cut off the power first and then take it out from water.You must use it after after.the skilled worker make sure it is safe for you to use it
lf you find electricity-leak,pls cut off the power at once.You should use after it is repaired
Pump must be installed flatly 20 centimeters above the water level and kept immovable in order to prevent liquid from flowing back and the pump breaking.
Pump couldn’t bear oil.water and collision
You should clear the filter sponges at least once every one month
The general acreage of the tube should not be less than 855% of acreage of pump outlet.Try to equip the tube Bend less than120 degrees,to avoid excessive presses losses,Affectreslts.
Cut off the power if you don’t use it tor a long time and put it on the Ventilated place.please operate it about ten minutes every one month in order to make sure it is not broken and could run smoothly when you need
lf the capability is reducing,please check:
1) Whether Voltage is beyond the certain rang.
2) Whether air filter,tube,the joint is broken or stocked
Whether pu mp ValVe,diaphragm is broken or stocked
Packikng
All Laser power will be packed in Carton box avoiding to be damaged during the shipping and we will make sure the best and high-quality products for you.
Shipping Policy
1.1.generally, All the items are only shipped after full payment is cleared ,we deliver the parcel in 2~4days after your payment online ,
2.2.We will deliver the parcel by other Express in case quoted Express can’t reach your shipping address.
3.We will ship to the address which you leave in Aliexpress , when you want to change address ,please inform us before the shipment , otherwise we are not responsible for wrong or undeliverable address
4.All items we sell are in good quality and under strict examination before shipment . We will try our best to avoid any quality problem .
5.The shipping cost does not include any import taxes , buyer should be responsible for customs duty , and we can write low value on the invoice ,if you need .
6.We are responsible for the china customs problem . Buyer should be responsible for the destination customs problem .
FUNCTIONCURVES<< OTHER MODLE NUMBER AS BELOW :
(Model) | (Voltage) | (Power) | (pressure) | (Output) | (Weight) | (Dimensions) |
ACO-001 | 220V/50Hz | 22W | 0.016MPa | 20L/min | 1kg | 156*82*104mm |
ACO-002 | 220V/50Hz | 35W | 0.03MPa | 40L/min | 1.2kg | 161*94*112mm |
ACO-003 | 220V/50Hz | 45W | 0.03MPa | 50L/min | 1.6kg | 181*94*118mm |
ACO-004 | 220V/50Hz | 55W | 0.035MPa | 60L/min | 2.4kg | 198*99*132mm |
ACO-005 | 220V/50Hz | 80W | 0.035MPa | 70L/min | 2.8kg | 212*99*132mm |
ACO-006 | 220V/50Hz | 105W | 0.04MPa | 85L/min | 3.3kg | 223*101*152mm |
ACO-007 | 220V/50Hz | 120W | 0.04MPa | 90L/min | 3.8kg | 248*101*152mm |
ACO-008 | 220V/50Hz | 138W | 0.04MPa | 100L/min | 4.5kg | 259*135*167mm |
ACO-012 | 220V/50Hz | 185W | 0.042MPa | 150L/min | 4.8kg | 278*136*171mm |
ACO-818 | 220V/50Hz | 385W | 0.05MPa | 300L/min | 6.5kg | 3.5*155*188mm |
ACO-016 | 220V/50Hz | 520W0.01 | 0.05MPa | 450L/min | 8.8kg | 340*170*202mm |
|
|
|
|
|
|
|
Payment Policy
We accept Western Union, Money gram, T/T, etc.
Feedback
Your satisfaction and positive feedback is very important to us ,please leave positive feedback and 5 star , if you are satisfied with our items and service .
If you have any problem with our items or service , please be free to contact us first before you leave negative feedback ,we will do our best to solve any problem and provide you with the best customer service