1. Description of  OK-380B concrete floor grinding machine

OK-380B concrete floor grinding machine   is main used for big or scope ground in grinding processing ,which can be effectively polished concrete surface layer of epoxy mortar and the old epoxy floor etc .

concrete floor grinding machine with vacuum cleaner power outlet,The vacuum cleaner power cable can be connected to grinding machine,In order to avoid the trouble .With the special mill can be also used ground renovation and polishing ,the real multifunctional machine and it is an ideal equipment to do ground level ground engineering processing .

2. Features   of   OK-380B concrete floor grinding machine

1.with grinding /vacuuming integration , Operation dust-free

2. Adjust the height of equipment,and always ensure that mechanical work under level state .

3.High efficiency and energy saving dynamic system ,compact and sophisticated manufacturing technology .

4.Free to replace the chassis ,consumables free configuration (diamond grinding wheel).

5.Only with a reversing switch ,toggle switch can be changed motor direction of rotation .

6. The other is equipped with vacuum motor, not dust in the construction process, the operation is simple, portable,which is the best choice of the epoxy construction

3. How to buy  epoxy floor grinding machine

1. Understanding of machine use.

2. Understand the machine's voltage, power, horsepower.

3. Understand the working width of the machine.

4.  Understand  the number of grinding head of the machine.

4. Technical parameters of  OK-380B concrete floor grinding machine  

OK-380B concrete floor grinding ma c hin e  instructions

1. Remove the machine from the box and lay it flat.

2. Remove the motor cover and check the belt tightness. If the belt is loose, pressed down the handle to tilt the chassis, chassis four fixing screws relax, tightness and sheet metal hand tightened following the push bolt until it reaches the specified, then the shell is installed.

3. Chassis tilt, exposed triangular discs, the grinding head is installed on a triangular plate is fixed, then the outer skirt to the appropriate location.

4. Put the machine flat, ensure three diamond grinding heads of the triangle plate and rear wheels in a plane.

5. Plug in power supply, rotating switch starting the machine. If the dust is out, then the switch is rotated to the middle stop stat, the rotation goes to the opposite direction and then run normally.

6. After the machine starts, according to the ground strength and processing effect to choose the appropriate speed uniform propulsion.

7.  Mechanical operation about 10 minutes can be stopped mechanically, then reverse to the dust on the filter removed, in order to achieve the better effect of the dust. Running 50 minutes will mechanical stop, turn on the vacuum cleaner, silo dust clean.

8.  In operation, there is any abnormal phenomenon please stop the machine immediately, then check the end can be re used.

OK-380B concrete floor grinding machine  operation method and notice

The operator must be familiar with the general structure and performance of the equipment, and shall not exceed the performance of the equipment. Parts and the volume of the abrasive tool shall not exceed 90% of the volume of the hopper. After the power is switched on, of idling, should run smoothly, no abnormal noise. Otherwise, should stop check. The work-piece must be removed before the work-piece is ground to remove oil and dirt. In machining process must be based on the work-piece grinding conditions to add the amount of abrasive and control water. When the work is finished, cut off power, cleaning equipment, good equipment maintenance work. Before starting the safe operation, check the fastening screws, check the motor shaft and other rotation is flexible. Equipment in operation, found that the exception should be parking.

Product packaging

We use standard export wooden case to pack OK-380B epoxy floor grinding machine . As for the shipping the best transportation mode will be sea transportation. The cost will be very low. Our cooperated shipping agent can ship products to any port all over the world.

Shipping

According to customer requirements, we provide ocean transport, air transport, multimodal transport, railway transport, transport, international express and other transport, to ensure the fastest delivery of products.

Service commitment

Before sales service: for you to provide project design, process design, suitable for your machine equipment purchase plan formulation, according to your special needs, design and manufacture of products, for your training technical personnel.

Sale  of services: accompany you to complete the acceptance of the equipment, to assist in the development of the construction plan and detailed process.

After sales service: 24 hours techinical support online. You have any problems, the company technical staff will help you in time to answer, ours service will make you satisfied.

Our company is a leading structural machinery supplier in China. It is a professional research, development, production, sales and aftersale service of hightech enterprises structural machinery. Factory technical force is strong, machining equipped with advanced technology, guarantee system.

Main product

Our main products include Conveyor Impact Beds, Impact Bars, Conveyor Belt Cleaners/sweeper, Head Pulley, Deviation switch, Pull rope switch, Polyurethane Products, etc. Products have been exported to Europe, Australian, USA, Russia, Chile, Philippines, Vietnam, etc. , and have gained good reputation for good quality.

Production line

Our tenet is "All Customers First, Quality First, and Credit First". Thus, we guarantee the items as the following: checking order quality and quantity when production. We have a team of technicians and engineers responsible for supervising all production and quality control processes. Thus, we have been able to attain a high reputation for our product reliability among overseas clients.

Why choose us

1. More than 10 years designing and producing experiences.

2. Advanced equipment and experienced worker to control the quality.

3. Can meet client’s requirement   to make various products.

4. Guarantee the good quality, standard size and quote competitive prices.

5. Have the Good service after-sales.

Must read before purchase

1. Specific product prices please contact the sales staff to the actual price of the.

2. According to the customer to specify the delivery location of different destination, send out goods time is 2-5 days.

3. Due to traffic conditions, weather and other factors resulting in a slight difference time in the process.