JINING OKING is Shandong Province of China area only in the production of epoxy floor grinding machine manufacturers, my company production of floor grinding machine is divided OK-300B, OK-380B, OK-600C, OK-900C four models, meet the needs of different users.

1. Easily and safety for operating.

2. Low maintenance cost and long life time design.

3. High performance, more durable.

4. Best service.

1. Grinding of standard concrete foundation.

2. Grinding of hard concrete foundation.

3. Grinding of Epoxy resin coating.

4. Removal of old coating.

5. Concrete surface grinding wool processing.

6. Concrete concave convex and fragile layer smooth processing.

1 The machine ability outstanding reflected good treatment effect.

2 Original cutting tools can be for the removal of the old film.

3 Dust cleaner integrated, clean construction.

4 Can be free to replace the grinding head, supplies can be free configuration (diamond grinding head, remove the old epoxy grinding head, grinding wheel piece, sanding paper, etc.).

5 The main motor and the cleaner uses the separate switch control, easy to use.

6 This machine has the function of vacuum aspiration, high flexibility, high efficiency and simple operation! Is the best choice for epoxy constructing.

1. Machine in the use of the machine to check the integrity of the machine, to ensure that the operation of the machine and electrical parts of the no moisture phenomenon, the operation control switch.

2. Install the grinding head: according to the construction and construction process to choose the match of the grinding head. Grinding head to properly installed. To avoid machine used in the process of grinding head from grinding head fixed parts caused by wounding and damaged goods phenomenon, using metal cutter head, must ensure the grinding head card into the disc in the middle. The use of screw connected to the polishing head, be sure to tighten the nut, choose Paste sand paper, sand paper must fit installation.

3. When installing the grinding head, the machine will tilt, support the rubber pad and the ground contact, the machine running switch to the closed position, press the emergency stop button and in the lock state.

4. Stop operation, press the stop button, close the switch, long time to stop the power switch.

1. Understanding of machine use

2. Understand the machine's voltage, power, horsepower

3. Understand the working width of the machine.

4. Understand the number of grinding head of the machine

Three parts:

1 Grinding head :  According to the construction situation;

2 Polishing sheet :  According to diameter;

3 Sandpaper :  According to diameter,or according to the thickness of the sand particles;

4 Sandpaper disk :  According to diameter.

Service commitment

Before sales service: for you to provide project design, process design, suitable for your machine equipment purchase plan formulation, according to your special needs, design and manufacture of products, for your training technical personnel.

Sale of services: accompany you to complete the acceptance of the equipment, to assist in the development of the construction plan and detailed process.

After sales service: 24 hours techinical support online. You have any problems, the company technical staff will help you in time to answer, ours service will make you satisfied.