Geomembranes type and hdpe, 100% vigrin hdpe with uv protection material hdpe liner for pond
USD $0.42 - $6.33 /Square Meter
Min.Order:5000 Square Meters
Hongxiang New Geo-Material Co., Ltd.
Products based on the United States GRI standards and ASTM testing standards for the implementation of
production. Product non-toxic environmental protection, construction fast. High mechanical strength, good
chemical stability, resistance to root penetration, high anti - leakage factor, anti - aging, UV
resistance, anti -decomposition, good plasticity, can guarantee eight years of service life, has obvious cost
advantages."Can be cut, can repair, can be welded", suitable for different laying volume, there is a strong
elongation at
break, the deformation has a considerable adaptability.Because of its excellent performance, it can
effectively prevent the water from the water and the water outside the pool, and keep the water clean.
At the same time, reduce the contact pollution of feed and soil, raise the utilization rate of feed, save
the breeding cost. Impermeable membrane surface was smooth and glossy, breeding germs can not be
attached in the, breeding for Shuiqing pool disinfection to facilitate thorough, to prevent the residual
contamination of bacteria. Water exchange silt thoroughly and fish ponds are simple disinfection can
be put into use, water a long shelf life; spilled liquid without dead angle, good effect of preventing;
single one day to complete a film pool construction (digging ponds and installed into the drain outlet,
the laying of the membrane) and give the relationship pool construction time and construction of pools
into the; winter temperature is higher than the cement pond, conducive to the extension of the eel loach
feeding period; fishing rate up to 100%.
Supply high strength anti aging high quality HDPE aquaculture geomembrane. Using the breeding membrane
is quality of virgin polyethylene resin made, main components for 97.5% of the high density polyethylene,
about 2.5%of carbon black, anti aging agent, antioxidant, ultraviolet absorbent, stabilizer and other accessories,
with the most advanced Italian automatic geotextile production equipment, by three layer coextrusion
technology is made.
Aquaculture ponds impermeable membrane process
Fishpond in how to handle it more reasonable? The anti-seepage treatment pond breeding
membrane is the key. Why must the fishpond seepage treatment?
Because after the anti-seepage treatment can prevent the pollution of groundwater and surface water, but
also can prevent groundwater into into the fishponds.General raising pond anti-seepage project will mostly
the aquaculture film do impervious materials, aquaculture membrane is environmental protection and no
pollution material will not pollute the groundwater and surface water, also won't because of the material leads
to the death of fish.Natural seepage control system and artificial fishpond mainly, the natural clay liner the
permeability coefficient is less than 1.0,10 cm / sec.In order to reach the water seepage coefficient, need to
adopt high-density polyethylene (HDPE) geomembrane laying anti-seepage lining.According to the architecture
of lining system can be divided into single lining, double lining, multi-layer composite liner, liner system.
Aquaculture membrane material consumption is mainly connected tower, impervious membrane tube wear,
repair, corner folding.In actual construction, but also with impermeable membrane mechanical operation
loss, operating personnel of technology, emotion, construction sites and other factors. In addition, has certain
relation to lay the loss of aquaculture membrane area size, generally speaking, dissemination of anti reverse
osmosis membrane area is larger, in proportion to the loss less. On the contrary, in the area of the shop into
aquaculture film, the greater the loss.
HDPE Geomembrane Specification (CJ/T234-2006)(USA GRI-GM13 Standard)