Name: Special aquaculture geomembrane hdpe
Brand: Hongxiang
Availability: InStock

Product Details

property

Property of Special aquaculture geomembrane

1.Aquaculture membrane without alkali, without disinfection.Aquaculture membrane itself is nontoxic and

environmentally friendly impervious material.

2.Cement pool cost is twice the cost of the aquaculture geomembrane,the useful life of the aquaculture

geomembrane longer than the useful life of concrete ponds. Low cost pool construction, pool constru-ction

speed.

3.Aquaculture film smoother than concrete ponds, farmed fish belly will not be damaged. Fish also more

healthy.

4.The principle of aquaculture:

(1) black opaque, inhibit the growth of grass under the pool, not to worry about the grass to the arch

damage geomembrane;(2) black geomembrane can be heat retaining, because black thing it is endothermic, then the eel just like

the high temperature environment, like the current our experiment confirmed is the eel, and the best

temperature is 31 degrees to 32 degrees,

so I'll let it heat, then, is to accelerate the growth rate of the eel, improve the raising the temperature.

5. Choose 0.75 mm specifications of aquaculture membrane, very strong, toughness is very good, we use

hand to tear,force to tear tear not bad, very good quality.

Products based on the United States GRI standards and ASTM testing standards for the implementation of

production. Product non-toxic environmental protection, construction fast. High mechanical strength, good

chemical stability, resistance to root penetration, high anti - leakage factor, anti - aging, UV

resistance, anti -decomposition, good plasticity, can guarantee eight years of service life, has obvious cost

advantages."Can be cut, can repair, can be welded", suitable for different laying volume, there is a strong

elongation at

break, the deformation has a considerable adaptability.Because of its excellent performance, it can

effectively prevent the water from the water and the water outside the pool, and keep the water clean.

At the same time, reduce the contact pollution of feed and soil, raise the utilization rate of feed, save

the breeding cost. Impermeable membrane surface was smooth and glossy, breeding germs can not be

attached in the, breeding for Shuiqing pool disinfection to facilitate thorough, to prevent the residual

contamination of bacteria. Water exchange silt thoroughly and fish ponds are simple disinfection can

be put into use, water a long shelf life; spilled liquid without dead angle, good effect of preventing;

single one day to complete a film pool construction (digging ponds and installed into the drain outlet,

the laying of the membrane) and give the relationship pool construction time and construction of pools

into the; winter temperature is higher than the cement pond, conducive to the extension of the eel loach

feeding period; fishing rate up to 100%.

Product Description

Supply high strength anti aging high quality HDPE aquaculture geomembrane. Using the breeding membrane

is quality of virgin polyethylene resin made, main components for 97.5% of the high density polyethylene,

about 2.5%of carbon black, anti aging agent, antioxidant, ultraviolet absorbent, stabilizer and other accessories,

with the most advanced Italian automatic geotextile production equipment, by three layer coextrusion

technology is made.

Aquaculture ponds impermeable membrane process

Fishpond in how to handle it more reasonable? The anti-seepage treatment pond breeding

membrane is the key. Why must the fishpond seepage treatment?

Because after the anti-seepage treatment can prevent the pollution of groundwater and surface water, but

also can prevent groundwater into into the fishponds.General raising pond anti-seepage project will mostly

the aquaculture film do impervious materials, aquaculture membrane is environmental protection and no

pollution material will not pollute the groundwater and surface water, also won't because of the material leads

to the death of fish.Natural seepage control system and artificial fishpond mainly, the natural clay liner the

permeability coefficient is less than 1.0,10 cm / sec.In order to reach the water seepage coefficient, need to

adopt high-density polyethylene (HDPE) geomembrane laying anti-seepage lining.According to the architecture

of lining system can be divided into single lining, double lining, multi-layer composite liner, liner system.

Aquaculture membrane material consumption is mainly connected tower, impervious membrane tube wear,

repair, corner folding.In actual construction, but also with impermeable membrane mechanical operation

loss, operating personnel of technology, emotion, construction sites and other factors. In addition, has certain

relation to lay the loss of aquaculture membrane area size, generally speaking, dissemination of anti reverse

osmosis membrane area is larger, in proportion to the loss less. On the contrary, in the area of the shop into

aquaculture film, the greater the loss.

specification

Specification of Special aquaculture geomembrane

1).thickness:0.5mm~3.0mm

2).1m~8m in roll width, the length as client's request

HDPE Geomembrane Specification (CJ/T234-2006)(USA GRI-GM13 Standard)

Packaging & Shipping

Packing & Shipping

Company Information

Hongxiang New Geo-material Co., Ltd Information

Hongxiang New Geo-material Co., LTD ., The headquarters is located in Dezhou, Shandong province. our company has

dedicated to research and development, production, application of geosynthetic material, filtration materials, composite

materials, building waterproof material for over 30 years. It is currently the largest and most complete varieties of the geo

synthetic materials production.

Hongxiang Co., Ltd cover an area of 670000M2, with more than 500various type of senior technical personel, and there

are more than 100 production lines, has more than 300 people professional construction team. Hongxiang Co., Ltd.

set research and development ,production, service as a whole, it is the modern science and technology innovation

enterprise which provide the overall solutions.

Our Services

Questions and Answers:
Q: Can you accept sample order?
A: Yes, we accept samples with little and reasonable charge.
Q: What is your MOQ?
A: Normally, 5000 m2 per order.
Q: What is your delivery time? Can we short it in 7 days or less?
A: 7 days for sample, 20-25 days for mass production.
Q: What is your payment terms?
A: T/T (Bank surcharge 50$/order), Paypal (3% surcharge), Western Union or 20% deposit 80% L/C.
Q: How can I get my order?How can I know you sent the goods.
A: We will send you the goods by UPS, DHL, Fedex, Oversea Shipment or other forwarder,

all with tracking number or B/L.
Q:How about your quality?
A: Try a small order, you will have your own judgment!