100 Standing seam metal roof panel machine

This Standing seam metal roof panel machine is the special roll forming machine for steel sheet cold-form industries. This Standing seam metal roof panel machine has many advantages, just like high forming speed, low noise, stable transmission, easy operation, good look and so on. 

Technical parameter for Standing seam metal roof panel machine
NO. Item Parameter Remark 

1 Suitable material Type Pre-painted sheet, galvanized sheet
Thickness(mm) 0.4-0.8
Yield stress (Mpa) 235
Width (mm) 1250
2 Forming speed (m/min) 20-25 Not including time for cutting
3 Main machine motor(KW) 3×3 Depend on actual design
4 Cutting motor power (KW) 3 Depend on actual design
5 Pre-slitting motor power (KW) 0.55 Depend on actual design
6 Decoiler motor power (KW) 7.5 Depend on actual design
7 Decoiler hydraulic station motor power (KW) 3 Depend on actual design
8 Total power(KW) 23.05 Depend on actual design
9 Power AC380V,50HZ, 3P Depend on customer
10 External dimensions(L×W×H, m) 24×3×2 Depend on actual design

Working flow for Standing seam metal roof panel machine
(Decoil)→Guiding system (pre-slit)→Roll forming→Cut to length→Output the finished products 
Each component description 
A)Full automatic decoiler (JK10-1250AM)
Main technical parameter of decoiler
a)Loading capacity: ≤10T
b)Suitable material ID: φ508mm/φ610mm
c)Suitable material width: 1000-1250mm 
d)Suitable material OD: <φ1300mm
e)Cantilever-type automatic decoiler 
f)Decoiler motor power: 7.5Kw
g)Hydraulic station motor power: 3Kw
h)Size: 2.8m×1.5 m×1.7 m
B)Main machine forming system
1. Guiding platform 
It is set in the beginning of the main machine with left-right guiding. It can help the operator to make the sheet in the right direction, left side and right side can be adjusted separately by manual screw structure. 
2. Pre-slit device 
The pre-slit device is mainly used to save the material while replacing the steel coils. It consists of slitting blade and electric motor. The user only needs to press the button and it will be done automatically. 
3. Roll forming system 
Roll forming system consist of machine frame, transmission parts and roll forming rollers etc.
a) Machine frame adopts welding structure with blasting treatment.
b) The roller of this line is made of No.45 steel, surface painted with hard chrome, all treated by full CNC precision machines, therefore the roller has good rigidity. 
c)Roller supporting type: Column
d) Electrical motor driving, the back/forward roller driven by chain, part of upper/lower rollers driven by gear
e) Adjust the screw bar manually to adjust the distance between upper/lower rollers for difference thickness of sheet. The dimension tolerance will change while the material changes.
4. Post cutting system 
a) Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted.
b) Adopts welded frame for good rigidity.
c) The power of cutting is provided by electrical motor.
C). Supporting table  
To support the finished panels. The table is 2m long.
D) Electrical control system 
1. Adopts PLC control technology which can ensure the automatic producing.
2. The system provides friendly man-machine interface which can set the batches, plate length, and quantity and so on.
3. Operation type: Input screen + button
4. Encoder calculates the number, which has function of calculation and measuring the length.
5. The electrical control system is shared.
6. Pre-set the control system for the coil car and stacking system in order for further usage. 

Packing and shipping about the Standing seam metal roof panel machine

http://www.m-rollformingmachine.com