1.Main parameter of the 3 waves highway guardrail roll forming machine:

Profile Drawing:(should be confirmed by both sides before signed a contract)


Product length: ≤ 4000 mm

Parameters of the raw material:
Material Thickness Width I.D. Max. O.D. Yield strength Max. coil weight
Q345 hot rolled 3~ 4 mm ≈ 510 mm Ф508 mm Ф1200 mm ≤300Mpa 5 T

Quality requirements of the raw material:
Thickness Tolerance Width Tolerance Steel straightness I.D. Tolerance Material standard

± 0.07 mm +0 mm/-0.2 mm 0.2 mm/m ±15 mm GB

2.Main Technical conditions of the3 waves highway guardrail roll forming machine:
Temperature: -10℃~35℃
Voltage: 380V± 10%, 50 HZ, 3 P
Air pressure: 0.6~1.2 Mpa
Total input Air: 300 L/min
Total power: ≈130 KW

Machine group operation direction: From left to right.
(Facing the operational panel)
Production capacity: ~ 10 m/min
Dimension (L*W*H): L≈ 30 m, W≈ 5 m, H≈ 2 m

3.Product process flow:
Decoiling → Levelling → Loop → Servo Feeding → Punching Machine (Including Pre-cut Device) → Transport Conveyor → Roll Forming → Stacker

4.3 waves highway guardrail roll forming machine Components List :

1 Decoiler
2 Levelling Device
3 Loop
4 Servo Feeding Machine
5 Punching Machine
(Including Pre-cut device)
6 Transport conveyor
7 Roll Forming Machine
8 Roll Forming Mould
9 Stacker
10 Hydraulic System
11 Electric Control System
12 Safety Or Protection System
13 Remote Control System
14 Spare Parts
15 Equipment Specification And Technical Information

Packing and shipping about the 3 waves highway guardrail roll forming machine

More about the MAXMACH