Contact name:Sandy Lin

Whatsapp/skype/Phone number:86-18020776786

Email:unity@mvme.cn

·Please install the drive on fire-retardant material such as metal. ·Keep the drive away from combustible materials. ·Keep the drive away from explosive gas. ·Only qualified personnel shall wire the drive. ·Note that the control terminal of EV1000 drive is of ELV (Extra Low Voltage) circuit, therefore, do not connect the control terminal with other devices directly. For example, before connecting the RS485 terminal with the PC’s RS232 terminal, an adapter with isolating protections must be connected in between; ·Never wire the drive unless the input AC supply is totally disconnected; otherwise, there is danger of electric shock. During power-on, do not touch the cables, control terminals, radiator and the pore plate on the housing of the drive. ·The drive must be properly earthed to reduce electrical accident. ·Install the cover before switching on the drive, to reduce the danger of electric shock and explosion. ·For drives that have been stored for longer than 2 years, increase its input voltage gradually before supplying full rated input voltage to it in order to avoid electric shock and explosion. ·Perform the maintenance job after confirming that the charging LED is off or the DC Bus voltage is below 36V. ·Only trained professionals can change the components, it is prohibited to leave wires or metal parts inside the drive to avoid the risk of fire. ·Parameter settings of the control board that has been changed must be revised, otherwise accidents may occur. ·The bare portions of the power cables must be bound with insulation tapes. ·When using optional parts, it is recommended to use those provided by Emerson Network Power, to secure safety.

NEW HIGH QUALITY EMERSON DELTAV KJ4001X1-NA1

Allen Bradley 1771-IB | DC Input Module *NIB*

Allen Bradley 2700-IM1 Series C *NIB*

Allen Bradley 1771-DCM Series A

Allen Bradley 1771-IDC | Isolated Input Module

Allen Bradley 1771-KA | Comm Adapter Module

Allen Bradley 1771-NIV /B | Hi Res Input Module *NNB*

Allen Bradley 1771-DA | ASCII I/O Module *NIB*

Allen Bradley 1771-AS | Adapter Module *NIB*

Allen Bradley 1771-AL | I/O ADAPTER *NIB*

Allen Bradley 1771-KA2 | Communication Module *NIB*

Allen Bradley 1771-IG Series A *NIB*

Allen Bradley 1785-KA3 | Communication Module

Allen Bradley 1771-ODD

Allen Bradley 1771-QDC | Plastic Molding Module

Allen Bradley 2760-RB | Flexible Interface Module

Allen Bradley 1771-OJ | Pulse Output Module

Allen Bradley 1771-DB /B | Basic Module

Allen Bradley 1785-LT Series B | PLC5/15

Allen Bradley 1771-OZL | Output Module *NIB*

Allen Bradley 1771-IV | DC Driver Logic Input *NIBFS*

Allen Bradley 1771-DB /B | Basic Module *NIB*

Allen Bradley 1785-LT Series B | PLC5/15

Allen Bradley 1771-IB | DC Input Module *NIB*

Allen Bradley 1771-IBD Series B

Allen Bradley 1771-IV | DC Driver Logic Input Module

Allen Bradley 2760-SFC1 | Memory Protocol *NIB*

Allen Bradley 1771-OWNA | 32 Point Contact Module

Allen Bradley 1771-NT1 | Hi Res Input Module