Product Details

Specifications

1.Indoor Carbon Monoxide Detector and Controller,
2.With 6 indicator lights
3.Semiconductor sensor

TOP CO on/off output indicator/ controller with 6 LED lights

Gas detected	Carbon monoxide
Sensing element	Semiconductor carbon monoxide gas sensor
Power Supply	24VAC/VDC
Consumption	2.5 W
Warm up time	36 hours (first time) 10 minutes (operational)
Response Time	<5 minutes for 90% step change
Signal Update	1s
CO Measuring Range	0~500ppm
Six indicator lights	The first green indicator light: CO≤0ppm The first and the second green indicator lights: CO ≥20ppm The first orange indicator light: CO≥50ppm The first and the second orange indicator lights: CO ≥100ppm The first red indicator light: CO≥200ppm The first and the second red indicator lights: CO≥300ppm
Relay output	One dry contact output, rated switching current 2A (resistant load)
Communication rate	RS485, 19200bps rate, 15KV antistatic protection
Operation temperature	0~60°C(32~140°F)
Operation humidity	5~95%RH, non condensing
Storage conditions	-10~60°C(14~140°F)
Net Weight	195g
Dimensions	100mm×80mm×28mm
Installation standard	65mm×65mm or 2”×4” junking box
Wiring terminals (max.)	6
Housing and IP class	PC/ABS fireproof plastic material, protection class: IP30

1) Wall mounting, real time detect CO with measuring range of 0~500ppm.

2) With Japanese semiconductor CO gas sensor inside. More than 5 years lifetime.

3) Full time indicate CO level, even the slightest leak can be detected

4) Specially design with six indicator lights indicate six different CO level ranges.

5) One on/off output optional for control a fan or another device such as an alarm.

6) Different CO level corresponds with different light indicating. Four setting CO value ranges can be selected to control the relay output via a set of jumpers.

7) RS-485 communication interface optional with 15KV antistatic protection, independent address setting.