Heat Pump Tremella fuciformis Drying Machine dried food dryer
Brief introduction:
Heat pump dryer is use of reverse Carnot principle .With free air to absorb heat and transfer it to the drying chamber, drying room temperature to achieve improved, with the appropriate humidity and dehumidification equipment to achieve dry materials. heat pump dryer Compressor - heat exchangers - Chokes - heat sink (outside the machine) - Compressor and other devices constitute a refrigerant cycle system. Under the action of the compressor in the refrigerant circulating in the system flow, it is done in the gaseous booster compressor heating process (temperature up to 100 ℃), releasing it into the machine dry in room temperature air heated by the heat, while they have been and converted to liquid cooling flow, when it runs out machines, liquid absorbs heat quickly evaporates once again transformed into a gaseous state, while the temperature dropped to minus 20 ℃-30 ℃, then the air around the heat sink will continuously transferring heat to the refrigerant. Refrigerant continuous cycle to achieve the heat in the air transport to the drying room heating room air temperature to achieve the purpose of dry material.
Technical parameter:
Model | BDHP-H-H3 | BDHP-H-H6 | BDHP-H-H9 | |
Suitable for drying chamber | m3 | 10~20 | 20~30 | 30~40 |
Power supply | V/PH/HZ | 380/3/50 or 220/1/50 | 380/3/50 | 380/3/50 |
Power input | KW | 2.8 | 5.8 | 10.8 |
Running current | A | 8/17 | 12.6 | 22.5 |
Auxiliary electric heater(option) | KW | 9 | 9 | 9 |
Heating capacity | KW | 12 | 26 | 35 |
Cooling capacity | KW | 7.5 | 20 | 25 |
Dehumidification amount | L/H | 8 | 20 | 40 |
Max. hot air Temperature | ℃ | 75 | 75 | 75 |
Working ambient temperature | ℃ | -10~45 | -10~45 | -10~45 |
Refrigerant | Kg | Mixture type/2.5 | Mixture type/4.3 | Mixture type/8.0 |
Compressor | Type | Scroll | Scroll | Scroll |
Brand | Copeland/Danfoss | Copeland/Danfoss | Copeland/Danfoss | |
Quantity | 1 | 1 | 2 | |
Noise | dB(A) | 60 | 65 | 70 |
Fan motor for drying | Power input/unit | 250W/unit | 250W/unit | 250W/unit |
Wind volume | m3/H | m3/H | 2500m3/H/unit | |
Recommend qty | 8 | 8 | 16units | |
Heat regenerator size | mm | 500*350*350 | 500*500*580 | 550*600*680 |
Fan motor for heat regenerator | Power input | 200W | 370W | 550W |
Wind volume | 2000m3/H | 2000m3/H | 3500m3/H | |
Size(mm) | 450*330*380 | 470*320*470 | 580*320*580 | |
Wind valve | Power input | 6W | 6W | 6W |
OPEN | Exchange fresh air | Exchange fresh air | Exchange fresh air | |
CLOSE | Drying | Drying | Drying | |
Size(mm) | 480*320*120 | 630*560*120 | 720*640*125 | |
Fan motor for evaporator | Power input | 250W/unit | 780W/unit | 780W/unit |
Wind volume | 4600m3/H | 10500m3/H | 2*10500m3/H | |
Rotate speed | 1350RPM | 1350R/Min | 1350R/Min | |
Hot air outlet | mm | 600*1100 | 650*1100 | 860*1485 |
Hot air return inlet | mm | 690*1100 | 750*1100 | 1050*1450 |
Dimension(L*W*H) | mm | 1650*960*1280 | 1720*1160*1280 | 2100*1460*1590 |
Net weight | Kg | 210 | 385 | 480 |
Gross weight | Kg | 240 | 420 | 540 |
Features:
1. Energy saving&Environmental protection
Adopt close dehumidify+circulating drying type,saving operating cost;
Without waste gas and waste heat pollution,low noise
2. Running Stable,operating easily
PLC+Touch Screen,running stable,operating easily;
Adopt PLC control,can setting different drying curve,
Suitable for drying different materials.
3. Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4. Exact control temperature and humidity
According to different material setting different drying curve,
the heat pump dryer can control the drying
chamber temperature between 20-80℃
5. Recovery volatilized component
Some kinds of material contain volatilized component,
In drying processing,hot and wet air will become condenser water then drain,
collect the condenser water so that collect volatilized component
