Product Details

Specifications

Coal Briquette Extruder Machine
-Firm structure
-Profesional factory
-Durable wearing part
-Offer guidance and test machine

easy to operate and convenient to transport coal and charcoal extruder machine/coal rods machine manufacturers

Product Description

Brief introduction

This machine is one kind briquette machine for civil use, it can press the powder of coal, charcoal, carbon black and other materials into rods which has certain intensity, the shape of rods can be round, six prismatic, square and so on. Also the rod shape can be customized. In the process of molding, it's unnecessary to add lime or other things, which will cut down the burning cost, and also the rods have large heating value, high economic benefit, what's more, the volume of the machine is small, no need to buy other drying equipment and steam supply, these will save the investment. The machine is widely used in chemical fertilizer factory, boiler and so on.

characteristics

(1)Coal rods machine use hardened reducer, small size, high load carrying capacity.
(2)Thick internal impeller blade design, impeller and liner using wear-resistant cylinder body made of cast materials, life expectancy increased 4-5 times than ordinary materials.
(3)Coal rods machine head can be replaced by a wear-resistant alloy steel, also easy to replace.
(4)Head and cylinder use splicing forms so it can be opened when the overhaul, replacement of internal impeller and cylinder liner is very convenient.

Working line

Rotating impeller from the charging port clip coal and put coal forward, coal is gradually compressed into tightly closed particles, while generating relatively large agitation and mixing.
At this time between the coal particles and between the particles and the blades have a strong simplified friction and shear, while under the action of heat generation, the coal temperature rise, water and binder more uniform, coal plasticity also greatly increased, then after the constraining effect of the cone mold, compressed between the coal particles more closely, and then pressed into a flat mold parts, and molded out from coal bar machine.

Main parameters of coal briquette extruding machine

Model	MBJ140	MBJ180	MBJ300	MBJ400
Capacity	1-2T/H for coal; 0.5-1T/H for charcoal	2-3T/H for coal; 1-1.5T/H for charcoal	3-5T/H for coal; 1.5-2.5T/H for charcoal	6-10T/H for coal; 3.0-5.0T/H for charcoal
Diameter of mould	20-40mm	20-60mm	20-80mm	20-80mm
Main shaft speed	46-60r/min	39-60r/min	35-60r/min	35-60r/min
Number of Spiral Blades	4	4	4	4
Motor	Y160m-4 11KW Y160L-4 15KW	Y180m-4 18.5KW Y180L-4 22KW	Y225s-4 37KW Y225m-4 45KW	Y315m-4 160KW
Reducer	ZQ350	ZQ400	ZQ650-750	ZQ850
Bearing	7511,211,210,1305	7614,314,313,1206	32320,320,319,1207	32322,322,321
Note	Spindle speed is the lowest speed, according to the current size and load weight, increase the level of appropriate yield

Packaging&shipping

Payment :30% TT in advance, 70%6TT balance pay off before delivery.

Packing: The machine and wear parts will protected by plywooden box or as customers’ will.

Delivery time: For one set, the delivery time is 7-10 days, for 1-5 sets 20-25 days, above 5 sets usually negotiate.

Shipping company: MSK/MSC/APL/EMC/WANHAL/KLINE and We will remind you before boat arrive and offer you all the customs clearance documents on time.

Finally product

In order to give you the quotation in time,Pls. tell me the answer of the following questions.

1. what's Raw material ?

2.The moisture and size of raw material ?

3.Capacity you need ?

4.The shape and size of the final product you prefer?