DAYI High oil yield waste engine lubricant oil distillation plant derived diesel with ISO CE certificate
USD $75,000 - $95,000 /Set
Min.Order:1 Set
Shangqiu Dayi Electromechanincal Technology Co., Ltd.
DAYI G10 steel made used lubricant to new motor oil system certificated by CE and SGS
DAYI New Tech Used engine oil recycling equipment (Change black to yellow)
Waste To D2 Diesel Recycling Plant Without Pollution /Tyre To Diesel/Plastic To Diesel Plant
Distillation Plant For Black Oil And Crude Oil And Pyrolysis Oil
pyrolysis oil distillation plant
pyrolysis oil distillation to diesel
95% oil output
free installation
easily operation
95% High oil yield waste engine lubricant oil distillation plant derived diesel with ISO CE certificate
1. waste oil distillation machine introduction
SHANGQIU DAYI ELECTROMECHANINCAL is engaged in researching,developing and manufacturing waste lubrication recycling and purification equipment..which provide all used lube oil recycling equipment and technology.which 's unique re-refining vacuum distillation process restores the lubricant constituents of used oil into "as good as new" lube base oil.
Waste Oil Distillation machine are not just purify used oil,instead, we developed an amazing regeneration process that can reclaim all kinds of waste black lube oil to clean base oil. waste oil recycling Equipment can recover waste black motor oil,waste engine oil,used industry oil,hydraulic oil,transformer oil ,almost all used lube oil.
Waste Oil Distillation machine equipment adopt physicochemical actions to polymerize,passivate, absorb and eliminate impurities
and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore
and regeneration the Waste oil to clean oil, save the component of the oil.
2. waste oil distillation machine Specifications
Waste Oil Distillation Machine
| ||||
Recycled base oil parameter: Waste Oil Distillation Plant | ||||
No | Item | Unit | Technical data | |
|
|
| Light base oil | Medium/heavy base oil |
1 | Viscosity(40°C) | mm2/s | 16~32 | 28~72 |
2 | Viscosity index |
| ≥99 | >110 |
3 | Appearance |
| Transparency | Transparency |
4 | Color index | ASTMD 1500 Number | ≤1 | ≤2 |
5 | Pour point | °C | -15 | -10 |
6 | Water content | %(W/W) | ≤0.05 | ≤0.05 |
7 | Flash point(open) | °C | ≥180 | ≥210 |
8 | Ash content | %(W/W) | 0.005 | 0.005 |
9 | Carbon residue | %(W/W) | ≤0.13 | ≤0.13 |
10 | Corrosion(copper,100°C,3h) | Qualified | Qualified | |
11 | Acidity | mgKOH/g | ≤0.05 | ≤0.05 |
Oil Distillation Machine
| |
Base oil Recovery Rate: | |
Component | Percentage(%) |
Gasoline&diesel oil | 7% |
Base oil | 80-85%(abase on your water content) |
Residue | 7-10% |
3. waste oil distillation machine flow chat
4. waste oil distillation machine details and advantage
1. Low cost, cost is 30$ for refine one tons used motor oil
2. Easy to operate,low operation cost, only 1-2 workers can control the machine.
3. The machine can recycle gasoline motor oil, diesel motor oil, all kinds of engine oil, and other lubricant
oil to clean oil.
4. Environmental friendly. This machine is fullenclosed, there is no any harmful smell come out form the
machine, colloid, oxid, acid, pitch will be converted to oil sludge, can be use as bitumen and fuel.
5. 85% high recycling rate. This includes 6-8% diesel and gasoline mixture,80-85% base oil and 8-10%
oil sludge.
6. Efficient vacuum systems
7. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling
The machine installation
We will give the foundation drawings to buyer after placing order .we will send engineer in time when buyer get the machine. We are free of installation , debugging machine , train buyer worker to operate the machine .Engineer will not leave until the machine can run normally .
We pay engineer salary for installation. Buyer need book ticket , supply food and accommodation to engineer.
Installation time about 30 days , not more than 35days. It depends workers working efficiency.
10) After-sales service
1.guarantee of 2 years for he whole machine,except wear piece
2.Based on our customers’ site and budget, our experts will design efficient, reliable installation drawings
4.One a month calling visit, to make sure there is no problems of the equipment
5. 24 hour technical support by e-mail
6.. Professional quotation detail vedio /CD
7.. dispatch engineer within 10 days