DAYI ISO Certificated ,Oversea After-sale service Avaliable 10TM Oil sludge Refinery Equipment
USD $40,000 - $65,000 /Set
Min.Order:1 Set
Shangqiu Dayi Electromechanincal Technology Co., Ltd.
DAYI NEW Oil Purifier Oil Recycling Machine Invironmental Friendly
DAYI No pollution used motor oil recycling to diesel base oil machines
No pollution used motor oil recycling to diesel base oil machines
New Tech waste oil pyrolysis oil distillation plant,scrap tyre recycling plant
High TECH Continous Waste tire Oil Distillation Plant for sale with stable operating
2016 lastest China High quality and profit waste tyre recycling plant
1. EC,ISO Certificated ,Over sea After-sale service Avaliable 10TMD Tyre Oil Refinery Equipment Technical Aavantage
A.Continuous operating for 90 days without coking.
B.Latest tubular heating system which can save fuel 20--30%.
C.All sealed and auto feeding and slag discharging system, available in 350degree temperature condition.
D.This model is for processing waste engine oil into diesel oil.
E.The output should be above 90%, water percent affect the data obviously.
Our distillation machine can distillate the flowing materials, turn the waste to energy.
- Fuel oil extracted from waste plastics and scrap rubber.
- Waste engine oil.
- Waste raw oil.
- Waste washing oil.
- Waste oil, Raw oil.
- Waste lubricating oil.
2.Major Parts Of Oil sludge Refinery Equipment
1.Reactor |
2.Catalyst tower |
3.Distillation tower |
4.Heat exchanger |
5.Condenser cooling system |
6.Filter |
7.Cooling pool |
8.Light component oil collection tank |
9.Middle Component oil collection tank |
10.Vacuum system |
11.Residue oil tank |
12.Dust remove disposal device(strong spray tower,draft fan,active carbonabsorption tower,purify water pool) |
13.water sealing |
14.strring tank |
15.Operation plat form |
16.Power Control cabinet |
17.Other accessory |
What Do We Get From Oil Refinery Equipment
Equipment Working Flow
Techanical Parameter For EC,ISO Certificated ,Over sea After-sale service Avaliable 10TMD Tyre Oil Refinery Equipment
Model | Inner Volume | Capacity | Shipped by Container |
DYZL- 01 | 1.6M3 | 1Ton | 1*40GP |
DYZL- 05 | 6.5M3 | 5Ton | 2*40HQ |
DYZL-ZL 10 | 13M3 | 10Ton | 2*40HQ |
DYZL-ZL 20 | 13M3 | 20Ton | 3*40HQ |
DYZL-ZL 50 | 20M3 | 50Ton | 5*40HQ |
2015 New Type Oil Refinery PlantWorking Process
A.preheater
Make remaining hot from the spiral flue outside the reactor to preheat the raw material oil ,it is physical reaction
B.reactor
After preheating ,the hot oil will be transported into the reactor by the oil pump !Before the hot oil into the reactor,there must be some oil at the bottom of the reactor and be heated already!due hot oil has already with some temperature so temperature will be rise more quikly than normal temperature oil in this way it can save energy ,improve effeciency! In this process liquid oil become oil gas little by little !it is physical reaction
C,Catalyst tower
It has three tower layer inside the catalyst tower
Every layer will be put catalyst for impurities removal ,decolor and smell removal according to raw material oil! To purify oil !it is Chemical reaction
Catalyst formular will be tailor make according to customer
D.Cooling system including pipe condenser ,condenser ,calandria cooling system and cooling tower
then the clean oil gas will go though the strong cooling system to low down the temperature quickly
E,oil water separator tank
The clean oil gas will be cooling down to become liquid oil into the oil water separator tank,it is physical reaction
F.stainless steel pipe filter
Pipe filter with filter bag which can prevent the invisible impurities size :300-500 mesh though ,it is physical reaction ,to purify oil
G.nagative pressure system
can make the running temperature low down,save energy ,improve efficiency ,ensure the safety of running !
H.water sealing
There will be few flammable gas which can not be cooling down in the normal condition after passing though the cooling system,though water sealing it will be go though gas burner ,recycle used by heating the reactor !
Before-sale:
² 24 hours service, any questions, contact us freely.
² Professional engineers will give you satisfied answers
After-sale:
² An skilled engineers will help you assemble the machine, and instruct your
workers to operate it.
² Any problems during the operation, contact us freely, we will help you.
² A partnership is a friendship !!!