Specification of HJ Series for your reference: 

(1)  HJ-1 Magnetic Heating Stirrer industrial magnetic stirrer

This mixer uses Japan direct current machine, the outer covering uses the static electricity to spurt models, has the merits of elegant appearance, durable and so on, the hot filament power can reach 200w, the mixed capacity can        between 100ml-1000ml.

(2)  HJ-2 Magnetic Stirrer  industrial magnetic stirrer

This machine uses the electronic circuit control, the agitation strength hard iron is big, noise is small, may stir alone. magnetic stirrer

(3)  HJ-3 Type Digital Thermostat Magnetic Stirrer

This mixer is my factory newest design, artistic, natural, automatic constant temperature, digital demonstration solution temperature, uses Japan direct current machine, does not have the noise.

(4) HJ-6 Multi-point Magnetic Stirrer 

1, The blender is a multi-connected magnetic stirrer

2, According to customer demand set four-point and eight-point

3, Heating and stirring functions according to user needs

4, Can be independent heated

5, Low noise, good stirring effect

Technical parameters:

Usage:  laboratory shaker

Before using this instrument, first stirred beaker required blender center of the table, added to the solution in the beaker and stir the solution, and then plug in the instrument's power plug, then turn on the power switch power indicator light That work. There are slow to fast speed (no fast file starters, avoid stirring beats), cut off the power when not working. To ensure safety, connect the ground when used, the instrument should be kept clean and dry, non-solution into the machine, so as not to damage the parts.

 Note: laboratory shaker

1. Stir stir when beating or found not stir, please cut off the power to check whether the beaker level position is positive, but please test it, if the voltage between 220V ± 10V, otherwise it will appear above.
2. Medium-speed operation can work for eight hours, high-speed operation can work for four hours.