Name: 2016 Lifelong Maintenance Advanced Continuous Waste Tire Pyrolysis Recycling Machine
Brand: JINZHEN
Availability: InStock

Product Details

Brief introduction

We manufacture and supply waste tyre & plastic pyrolysis plant, and has been exported to India, Pakistan, Thailand,South Africa,Romania, Albania European countries and so on.

Our pyrolysis plant can be used to refine oil by using waste tyre, waste plastic and rubbers recycling to crude oil, carbon black, steel wire and gas, and then after distillation will get diesel oil. Heating materials can usewood, coal, fuel oil, nature gas and electricity. They are widely used in hotels, restaurants, bathing center, power plant, engines and chemical sector and so on.

Raw material

NO.	Raw material to pyrolysis	Note
1	Tyre	Cut into pieces or press into block
2	Plastic	Dry is better than wet
3	Rubber	Different kinds of rubber
4	Oil sludge
Contact me +0086-18303638168 for more details about percentage of different raw material!

Fuel

NO.	Fuel	Note
1	Coal	/
2	Firewood	/
3	Oil(fuel oil, tyre oil, heavy oil etc..)	Use oil burner
4	Natural gas	Use gas burner
5	electricity	Electric stove wire
6	Carbon black pellet	We can supply carbon make pellet machine

Final products

NO.	Name	Percentage	Useage
1	Tyre oil	45%	* can be sold directly. * make diesel and gasoline by using oil distillation machine. * can be as fuel.
2	Carbon black	30%	* can be sold directly. * make fine carbon by using carbon black refining machine. * make pellet by use carbon make pellet machine.
3	Steel wire	15%	can be sold directly. make steel bloom by using hydraulic press-packing
4	Oil gas	10%	* can be as fuel burn by using gas burn system *extra gas also be storage as fuel for other heating.

Main parts of waste tyre pyrolysis equipment

1. Horizontal reactor

2. 3 remove dust and sulphur system

3. Gas separator

4. Oil-water separator

5. Water cooling system

6. Water seal

7. Depositing tank

8. Draft fan

9. Oil tank

10. Heavy oil tank

11. Waste gas recycle system

12. Vacuum device

13. Pressure and temperature system

14. Electric control system

3-D flow chart

Technical detail

Ø This is a batch process system.

Ø The wastage tyres are fed into the reactor vessel and heated under controlled conditions of

temperature and pressure.

Ø The process will bring about molecular restructuring of the rubber under the pyrolysis process

as the result; furnace oil in gaseous form is produced along with other gases.

Ø These vaporized gases are passed through heat exchanges, where in the furnace oil is condensed

into liquid form.

Ø During the process, carbon black and steel are also generated.

Ø The heat exchanger uses coolant water, as a condensing medium and this water is re-circulated

through process.

Ø These systems can be operated 24/365.

Delivery site

Delivery time

We will delivery the machine within 15-25days after get the advance payment.

Port (China)

lianyungang port & qingdao port & shanghai port

Warranty and machine life

We guarantee the complete machine 2 years, the reactor life more than 4 years,others

parts no need change lifelong expect the wearing parts.

Old customer