Oil sludge refinery machine for waste oil from ship By pyrolysis 

Batch type pyrolysis machine

reactor size:2800*6000 mm 

Raw material: Q345R

Reactor rotate speed: 4 rpm

Power:21-30 kw

Feeding way : by shovel car or in bag, or by conveyor

Slag discharge way: automatic

1.Feed raw materials:

The raw material can be waste tire/waste plastic/waste rubber. Always feed by the auto feeder.

2.Pyrolysis:

Include a reactor and catalyst room. Heat the reactor by coal/wood/oil/natural gas.

This part will produce high temperature oil gas, the oil gas then flow into the next system.

3. Condensing:

Oil gas come out from the reactor and catalyst chamber then cooling down in this part.

Condensing system include condenser pipe, oil water separator, horizontal condenser

and waste gas condenser. This will make the oil yield to the maximum.

4.Waste gas recovery:

This part mainly deal with the gas that cannot be condensed. The whole process is very

steady and high efficiency.

5. Discharge:

After finished oil produce, the temperature of reactor can be cooled down, When the

temperature falls down to 40 degree then carbon black can be discharged automatically

by the way of anticlockwise rotate the reactor. The carbon black will drop into slag pool

and then use screw conveyor to clean the slag pool. After discharging the carbon black,

we can discharge the steel wire. There is steel wire hook in the auto-feeder, we only need

put the steel wire hook into the reactor, and start the motor, the steel wire can be pulled out

easily, there is no need for workers to contact the reactor, it is very convenient.