I Background and Meaning of the Project Development

Depend on the modernization of society, on the one hand the rubber industry is flourish, and rubber is general used in all kinds of business; on the other hand due to the rubber is not easy to corrupt, waste products grows day by day and has large amount at hand, it has become a big environmental pollution which called as black pollution, and it's on the rise.Compared with the foreign developing country, our country is lack of experience of disposing this pollution, capital and market also are big problems.  

At present, China's annual tires outputhave ranked third in the world, and have more than 130 million tires,the scape tires produced each year exceed 65 million, and increase with double-digit ratesevery year. And 70% of the waste tyre resources have not been recycling, and the recycling rate of waste diagonal tyre also is less than half. China rubber resources are very scarce, rubberraw materials mainly depend on import. Therefore, strengthen the management of the recycling of waste tyre is urgent.

The simplest method of disposing rubber waste is to create reclaimed rubber powder and oil refining. About producing reclaimed rubber powder, because of its high production costs, narrow marketing channel, plastic runway and other products longuse cycle, such negative reasons restrictthe further development of this project. Oil refining, for good sales, floating capital turnover fast and high profits, has drawn greater attention. Such as the present average price of domestic recycling waste tires is $167 /ton, oil output of the waste tiresis 45%, and superadd fuel, labour, water and electricity production cost, the cost of producing each ton of tyre oil is $365/ton. And the market price of the tyre oil now is $603/ton to $762/ton.

China current waste tyre oil equipments mainly adopt vertical fixed reactor, the technical process is as follows: first feed the waste tires from the top of pyrolysis reactor by labour, and close feeding inlet, then reactor bottom begin to heat slowly by using the left tire scraps, coal or wood as fuel, the volume of pyrolysis reactor is usually 5 cubic meters, and feed 1 ton tires, it general need 12 hours to refine one reactor. Finish one reactor, it need to stop 12 hours. When the temperature of reactor drop fully, open the slag hole under the reactor bottom to discharge slag , then begin to feed reactor from the feed inlet, enter the next cycle.

The three wastes disposal during production of domestic vertical waste tire refine equipment can't reach the environmental requirement, and output is low, it doesn't have continuous production ability. If you want to have economic profit, you need more equipments joint production.

We cooperate with Hubei Baoding Lekai Chemical Designing Institute experts team, on the basis of the study, avoiding weakness; base on the actual, start from the actual situation, and after years of scientific research and design, we introduce " Shangqiu Harmony Machinery Manufacture Co., LTD unique series waste tyre extract carbon black and tyre oil equipments."

The brief introduction of oil distillation machine

 1. Distillation machine list 

 1) reactor

 2)catalyst

3)condenser

 4) cooling system

 5)oil-water separator

 6)filter

 7)agitator tank

8)water seal

 9)vacuum device

 10)buffer tank

 11)heavy oil tank

 12)heat exchanger

 13)strong spray tower

 14)chimney

 15)activated carbon absorbent tower

 16)draft fan

 17)oil tank

 18)cooling tower

 19)temperature meter

 20)temperature sensor

 21)pressure meter

 22)pressure sensor

 23)security valve

 24)electric cabinet

2. Raw material:

 fuel oil, waste engine oil, tyre oil, waste plastic oil, waste rubber oil

3. With high configuration and high technology.

4. The waste oil after distillation can be used directly in the cars after 30%-50% mixed with standard diesel.

 5. Without pollution:

 the waste-gas can be burnt again in the reactor.

 6. Get more profit from the purified oil

 7. Safety system

  There are safety alarms in the temperature gauge and pressure when the temperature and pressure is abnormal, the alarms will ring. then you should do some safety precautions in time.

 8. Terms of payment:

 By T/T(30% deposit will be prepaid, 65% will be paid before loading, the balance 5% will be paid after installing and debugging).

 9.Delivery time:

 We will delivery the machine within 25days after receving deposit.

 10. After-sale service:

 1) The warranty time: we guarantee the main reactor 3years, other parts one year expect the wearing parts.

 2) Beyond the warranty time, if the buyer need the seller's technician to repair equipment, the buyer should provide the accommodation and round-trip ticket.