Product Details

Low cost CLC light weight foam concrete block machine

Product Description

New building material foam concrete block features:

*Low Cost                                 *Light Weight
*Heat Preservation                *Sound Insulation
*Fireproofing                          *Aseismatic
*High Construction Speed     *Environmental Protection

The Formula to Produce Foam Concrete Block:

GAODE Foam Concrete Block Machine include:

1. Foam Concrete Mixer
2. Foam Concrete Pump
3. Foam Concrete Block Mould
4. Foam Concrete Block Cutting Machine
5. Foaming Machine
6. Foaming Agent
7. Foam Concrete Hardener

Detailed Images

GM2000 Foam Concrete Mixer:

Features:

1. The foam blending fast, blowing foam uniformly.

2. Without suspended matter, without the declining, it’s good for steady pouring.

3. Little loss ratio of foam maintain the foam proportion in the foam concrete to make the products with stability density.

4. No dead angle design, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.

5. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.

6. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high, it saves energy.

Technolog data:

Model	GM2000
Production Capacity	15-20 m3/h
Output Volume	1500 L
Material Input Volume	2000 L
Main Shaft Revolution	32 r/min
Hopper Lifting speed	22 m/min
Mixing Motor	11 kW
Winding Motor	5.5 kW
Water Pump Motor	1.1 kW
Vibrating Motor	0.55 kW
Foaming System	5.5 kW
Max. Moving Speed	15 km/h
Total Weight	3200 kg
Overall Dimension	2600x2250x3000 mm

GH76 foam concrete pump:

Features:

1. No valves

2. Self-priming

3. Only tube to replace

4. Spiral bevel gear SEW series

(Cycloidal pinwheel reducer gear box for option)

5. Mainly consists pump house, rotor, idel rotor, squeeze tube, and driving unit

6. Easy maintance, low cost, short down time

Technolog data sheet:

Model	GH76
Output	20m3/h
Max. theoretical conveying pressure	1Mpa
Hose ID(mm)	76mm
Re (r/mm)	55m
Max. Particle Dia ( mm )	10
Max. Suct.Left ( m )	5
Motor Power (kw)	15

GW30B Foam Concrete Block Cutting Machine:

It is specially used to cut various foam concrete blocks. Easy operation, high efficiency. The block size between 100-200-300-400-500-600-700-800-900-1000-1100-1200mm could be adjusted willfully.

Features:

Name

GW 30B Wire Cutting Machine

Electric Motor (Kw)

2.2 kw*1 set, 0-56r/min adjusted

750w*2 set, 0-560r/min adjusted

Effective hoisting height

700mm

Cutting plantform size ( L*W*H)

1240*1240*225mm

Net cutting size (L*W*H)

1200*1200*600mm

Cutting cycle

60-180seconds

Overall dimension (L*W*H)

2160*2060*2280mm

Total weight

1100kg

Packaging & Shipping

Foam Concrete Block Machine Delivery :

Application

Foam Concrete Block Machine Worksite:

The brick made by our Foam Concrete Block Machine:

Certifications

Certification of our company

Our Services

Trade assurance advantages:
1. Quickly lock trusted seller, saving time and energy;
2. Reduce the risk of online purchasing;
3. If there is a trade disputes, you can complain to Alibaba and get benefits compensation.

We are a member of trade assurance on Alibaba, and our trade assurance amount is USD78000.00 Through trade assurance you can 100% payment refund up to trade assurance amount for orders not meeting agreed Delivery or Quality terms.

If you have any question please feel free to contact me.

Gaode Equipment Co.,Ltd.

Tel:+86-371-55951210 Fax:+86-371-63526676

Skype: lena.liu8

Whatsapp&viber: 86-15903613994

Thank you for your time and Welcome to Visit our factory!

FAQ

Question 1: What is CLC?

CLC is cellular lightweight concrete. It is produced by initially making slurry of Cement, Sand (optional), Fly-Ash & Water, which is further mixed with the foam agent.

Its many uses for making blocks/bricks, wall cast in-situ, roof insulation, void filling, trench reinstatement, bridge abutment work, and many others. For more application, please see application

Question 2: What are the raw material?

For making CLC bricks/blocks, the material mainly is cement, fly-ash/sand, foam agent, water etc.

Question 3: For cutting blocks, saw blade cutting machine or wire cutting machine is better?

If use blade cutting machine:

a. Longer cutting time after pouring concrete

b. Need 2 machines for cutting in 2 directions

c. High blade consumption, especially if the sand in CLC is course or density is high

But if use our GW30B wire cutting machine, it will solves the above problems.