Product Details

GZ-3 3m3/h dry mix concrete gunite shotcrete spraying machine for swimming pool pond

Product Description

GZ-3 shotcrete machine is a compact concrete spraying machine for dry-shotcrete,With a conveying capacity from 0.4 to 4.0 m3/h, the GZ-3 shotcrete machine is suitable for each specific job.The machine also has the high quality steel on steel sealing system. Experience has shown up to 10 times less wear on the steel plates, depending on material, output capacity, hose diameter and compressed air supply. This again leads to less standstill time and wear cost and therefore to more economical spraying operation.

GZ-3 world wide brand motor electric dry mix concrete spraying machine features:

Non-adhesion going-through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.

Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shotcrete quality.

Four-point clamping device make it easy to adjust the pressure between sealing plate and rotor disk so as to no air and dusk leak and prolong consumption parts life.

Principle of GZ-3 Concrete Shotcrete Machine

Application of GZ-3 shotcrete machine

1). Dry shotcret; 2). Concrete repair; 3). Joint filling; 4).Concrete reinforcements;

5). Swimming pools; 6). Slope stabilization; 7). Mine and tunnel building.

Accessories

Technical data

Technical data:

Electric Motor Driven:

Output Capacity	3m³ /h
Max. Horizontal Conveying Distance	200m
Suitable Mix Ratio(Cement/Sand)	≤1:3~5
Max. Aggregate Size	Φ10 mm
Conveying Hose Inner Diameter	Φ38/Φ50mm
Conveying Pressure	0.2-0.4MPa(29-58PSI)
Air Consumption for conveying material	5~6m³/min(180-215CFM)
Material Charging Height	0.9m
Rotor Speed	14r/min
Motor Power	3kW(4hp),IP55
Available Voltage	220V,380V, 440V,660V 50Hz/60Hz
Overall Dimension(length×width×height)	1.13×0.54×1.02m
Net Weight	430kg

Air Motor Driven:

Output Capacity	1.5-3m³ /h
Max. Horizontal Conveying Distance	200m
Suitable Mix Ratio(Cement/Sand)	≤1:3~5
Max. Aggregate Size	Φ10 mm
Conveying Hose Inner Diameter	Φ50mm
Conveying Pressure	0.2-0.4MPa(29-58PSI)
Air Consumption for conveying material	5~6m³/min(180-215CFM)
Air Motor Air Pressure	0.5MPa(71PSI)
Material Charging Height	0.9m
Rotor Speed	14r/min
Air Motor Type	TMH3.2
Air Motor Air Consumption	4.8m³/min(171CFM)
Overall Dimension(length×width×height)	1.13×0.54×1.02m
Net Weight	430kg(947lbs)

Diesel driven:

Rated Output	2-3m 3 /h
Max. Horizontal Conveying Distance	200m
Suitable Mix Ratio(Cement/Sand)	≤ 1: 3~5
Max. Aggregate Size	Φ 10 mm
Conveying Hose Inner Diameter	38/51mm
Operating air Pressure	0.2-0.4MPa(29-58PSI)
Air Consumption	5~6m 3 /min(180-215CFM
Diesel Engine	10hp,2200rpm
Diesel Engine Starting	Electric start
Clutch Type in Diesel Engine	Automatic Clutch
Material Charging Height	0.9m
Rotor Speed	9-13r/min
Overall Dimension(L× W× H)	1.8× 0.8× 1.2m
Net Weight	480kg