CLC foam concrete block making machine factory price 

Brief Instruction

Foamed concrete is a lightweight concrete derived from portland cement and common portland cement as inorganic cementing material, coal ash as admixture, sand as aggregate, mixed with organic foaming agent. Non-load-bearing walls constructed by cast-in-situ GF foamed concrete has changed the traditional way of building walls with precast concrete segments. The excellent integrity and easy operation means low labour intensity and low building cost. Besides, good strength characteristics with reduced eight, excellent sound and thermal insulation, and water proof, etc., all these performances make it an ideal substitute of present traditional walls.

CLC is cellular light weight concrete, has been used in over 40 countries over the past year for build houses, apartments, schools, hospitals, industrial buildings etc.

Benefits of CLC blocks

1. Lightweight: Dry bulk density 300 kg/m^3 -1500kg/m^3 , 1/8-1/2 as light as common concrete.

2. High Compression Strength: compressive strength ranging from 0.6 MPa to 25 MPa, 4 times as traditional aerated concrete.

3. Thermal Insulation: good heat preservation and good thermal insulation.

4. Impermeability: Low water-intake rate and high impermeability.

5. saving cost: Easy and fast production. No primary energy and reduced transportation costs

Main machines for making CLC blocks include: GM1000 foam concrete mixer, GH50 foam concrete pump, Foam generator.

GM1000 foam concrete mixer

The foam concrete mixer mainly includes mixer, feeder hopper, Foam generator, water pump, control panel, tank.

Features

1. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.

2. Specially mixing blades, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.

3. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high, it saves energy. 

Technical data

GH50 foam concrete pump

Features:

1. No valves
2. Self-priming
3. Only tube to replace
4. Spiral bevel gear SEW series (Cycloidal pinwheel reducer gear box for option)
5. Mainly consists pump house, rotor, idel rotor, squeeze tube, and driving unit
6. Easy maintance, low cost, short down time

    Main technical data sheet

Manual moulds

The mould size

600x200x200mm 600x200x150mm 600x200x100mm 600x200x75mm 

500x400x100mm  500x250x200mm  500x250x100mm

 Also could be customized according to your demands.

If want to improve efficiency, you could use wire cutting machine.

It is specially used to cut various foam concrete blocks. Easy operation, high efficiency. The block size between 100-200-300-400-500-600-700-800-900-1000-1100-1200mm could be adjusted willfully.

The brick made by our GF5 concrete foam block making machine

The Foam concrete’s other application

1.     External wall thermal insulation 

2.     Thermal insulation roofing

3.     Thermal flooring

4.     Upstandingbeam foundation ditches filling

5.     Sound insulation and fire protection walls

6.     Playground and track construction

7.     Sound insulation layer, tunnel lining filling

8.     Cellar, basement and arch filling                      

9.     Sewers and Drains filling 

10.  Horizontal floor heightening 

11.  Water tank and fuel tank building

12.  Platform filling and mending 

13.  Garden and rockeries 

14.  Foam concrete block 

15   Foamed concrete precasting ,hollow wallboard casting

Our excellent quality, competitive price, good service, better work attitude, to provide you with tailored one-stop service, welcome to discuss cooperation.

Looking forward to your inquiry.