Specifications

1.stainless steel bulk milk cooler
2. Tank part,Vol,500L~15000L
3. Insulation,materialPU foam
4.high sanitary grade

 

 

Construction

Special calibrated manuel scale with 3-4 % sensitive rate1.walled 2mm and 1 mm walled accuplated Ep type heat transfer plate. Isolated walled from AISI 304 S.S

• Tank body accuplated on whole chassis
• Product Outlet DN 50 Butterfly valve
• Designed according to 0 liquid discharging system
• Insulation material; high density polyurethane foam without CFC and isolation thickness 60 mm
• Spring cover system and Ø 250mm product inlet.
• 1 pce 0,24 Hp 30 rpm gearbox and stainless steel agitator.
• Agitator has designed according to milk structure protection.
• Capacities;300lt ,500lt,1000lt,1500lt,1850lt,and 2000lt.
• Welding; Argon Tig welding system applied
• Cooling evaparator (rolbont) has tested against 40 bar test pressure.

Cooling Group

Cooling compressor are accuplated on chassis Min.gas charge ability A 404 gas cooling. Cooling possibility in min.milk quantities.

• Milking refrigating time from 35°C to 4°C under 2,5 hours.
• Cooling Performance Class 2-A-II
• Drier, sight glass, expantion valve, selenoid valve,liquid protector and valves etc.
• which belongs to the compressor ere existed.

Electronic Control Pannel

• Working principle of tank, Milk Temperature are controlled by control panel.
• Phase protection regulator in order to prevent of voltage increasing and decreasing, mixing of phase
• When open the cover automatically gearbox system take off.
•