Specifications

1.PGZ vacuum plate dryer
2.Low energy consumption, high efficiency
3.Safe and convenient, material is not easy to be polluted.

Description

   Feeding material into vacuum plate dryer, because boiling point of material will fall under the state of vacuum and along with the rake turning over continuously, the surface of material will be changed continuously. Therefore it speeds up drying rate greatly. The wet air will be drew out by vacuum pump. This equipment is mainly used for drying heat sensitive material, toxic material and the material that easy to oxidize or needs to recover solvent.

 

Features

   Under the state of vacuum, the machine can keep material to feed and discharge continuously.

Closed operation, PGZ Series Vacuum Plate Drier is particularly suitable for drying material that has toxicity or easy to oxidize.

   It is very convenient to recover organic solvent in wet gas.

   Low energy consumption, high efficiency, safe and convenient, material is not easy to be polluted.

 

Technical parameters:

type	Diameter mm	High mm	Area of dry m2	Power kw	type	Diameter mm	High mm	Area of dry m2	Power kw
1200/4	1850	2608	3.3	1.1	2200/18	2900	5782	55.4	5.5
1200/6		3028	4.9		2200/20		6202	61.6
1200/8		3448	6.6	1.5	2200/22		6622	67.7	7.5
1200/10		3868	8.2		2200/24		7042	73.9
1200/12		4288	9.9		2200/26		7462	80.0
2200/6	2900	3262	18.5	3.0	3000/8	3800	4050	48	11
2200/8		3682	24.6		3000/10		4650	60
2200/10		4102	30.8		3000/12		5250	72
2200/12		4522	36.9		3000/14		5850	84
2200/14		4942	43.1		3000/16		6450	96
2200/16		5362	49.3		3000/18		7050	108