Name: Environmental wood briquette carbonization stove with smoke recycle systerm
Brand: Yuxiang
Availability: InStock

Product Details

Product overviews

Product overviews of wood briquette carbonization stove

Product Description

Product description of wood briquette carbonization stove

charcoal briquette carbonization furnace is to carbonize the biomass briquette into wood charcoal.charcoal briquette carbonization furnace for biomass charcoal can greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time (from 24 hours to 6 hours), and shows the features of easy operation, higher safety, high efficiency, and energy saving. This furnace is ideal equipment for charcoal briquette carbonization furnace to have anoxic distillation carbonization.

Advantage

No polution: there are two reasons : the fog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again. We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.

Carbonize time more shorter: This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove.

Easy operate: One people can control 2-3set, but need the crane for help; When one inner stove have been finished carbonization, use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot.

Structure

Introduction of the main parts of wood briquette carbonization stove

(1) Outer stove

includes heating room (for heating the inner stove), furnace body and heat-keeping layer (it is made of the heat insulating material)

(2) Inner stove

Consist of the stove tank body and the sealed top cap. Both of them are made of the heat resistance thermal steel, three inner stove can be stacked together for saving space and shipping cost.
(3) Smoking recycle tube

During the process of carbonizing, there will be some smoke.( can be burning) the smoke can be collected and returned to the furnace.

(4) Purification tank

This system is consisting of purification tank and the exhaust-heated cycle pipe.

(5) Hoisting equipment

it include the steel hoisting frame and the E-hoist .And it is easy for loading and unloading the stove.

Technical Parameter

Model	Power	Capacity	Weight	Lading capacity	Temp	Equipment list
THL -1	0.75KW	3t/24hrs	4T	2.75*3 (cbm)	400-600℃	1outer furnace, 3Inner pots,3covers, 1purification tank, 1*3t lifting device
THL-2	0.75KW	6t/24hrs	8T	2.75*6 (cbm)	400-600℃	2outer furnaces, 6Inner pots,6covers, 2purification tank, 1*5t hoist equipment with motor
THL-3	0.75KW+1.5KW	9t/24hrs	12T	2.75*9 (cbm)	400-600℃	3outer furnaces, 9Inner pots,9covers, 3purification tank, 1*5t hoist equipment with motor
THL-4	0.75KW+1.5KW	12t/24hrs	16T	2.75*12 (cbm)	400-600℃	4outer furnaces, 12Inner pots,12covers, 4purification tank, 1*5t hoist equipment with motor

Details

1.What’s the raw materials can be carbonized?

such as wood logs,bamboo, wood briquettes,coconut shell, biomass waste,cashew shell, macadamia shell and so on.

Final product of wood briquette carbonization stove

Difference between Yuxiang machinery and others about wood briquette carbonization stove

1. Thickness of outer stove is: wall --- 4mm, bottom --- 12mm, other supplier uses 3mm and 8mm.
2. Thickness of Inner pot is: wall --- 8mm, bottom --- 10mm, other supplier uses 4mm and 6mm.
3. The brick we used for building outer stove is good quality, high temperature resistance, white refractory bricks. Other supply uses common bricks.
4. National certified motor with copper core.
5. Container design for better loading solution.

FAQ

1. What materials do you use to dry ?
You can use almost all the biomass materials.

2. What is the max moisture of your material ?
Our machine can dry biomass materials between 60% and 70%.

3. What is the temperature and carbonization rate?

230℃ can reach 99%. .

4. Could you offer complete briquette machine production line ?
Yes, we will allocate suitable production line, according to your special requirement, such as crusher, conveyor, dryer, briquette machine, etc.

5. What is capacity of your machine ?
One inner pot can load 2.5tons machine-made briquettes; 8hours will get one ton machine-made charcoal.
One Inner pot can load 2tons natural wood, 8-10hours will get 600kg-800kg natural charcoal.
Therefore, one furnace can get: 3tons machine-made charcoal, 1.8-2.5tons natural wood charcoal.

6. What is carbonization time ?
Usually, 8-10hours. If your natural wood is fresh, it takes long time to remove moisture of wood;Therefore, carbonization time is longer.

7. Can we use the machine directly ?
Yes, start the machine, when temperature reach 320 degree, put your materials into hopper, you will get fuel briquette.

8. Does this machine has spare parts ?

Yes, below is some parts of this machine, please check it. When you buy our machine, we will attach 1*propeller, 1*shaping pipe , 3* welding rods, 3* Heating rings.

Related production

Continuous carbonization furnace

Capacity: 1t/8h
Weight: 5t
Power:1.5kw
Usage:Put the wood branch,biomass material into the stove,through 8h carbonizting,became wood charcoal.It is used to BBQ,fuel of industrial.

More details>>>

Get Quotation