tungsten carbide wear plate factory direct sell from zhuzhou
USD $45 - $50 /Kilogram
Min.Order:5 Kilograms
Zhuzhou Hongtong Tungsten Carbide Co., Ltd.
Advantage of our carbide products:
1) made from 100% raw virgin material
2) More than 10 years production experience
3) Advanced equipments
4)All products go through process and final inspection
5) All size available
6)Small/Trail order accepted
Products information:
Tungsten carbide, also known as carbide, is an extremely hard alloy made from tungsten and carbon that offers high wear resistance as well as good corrosion resistance.
Tensile strength, used to indicate the material's overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.
Grades and application recommended
Different grades are available, such as K10, K20, YG8, YG6, P10, P20, YT15 ect.
ISO Grade | Grade | Density (g/cm³) | Hardness HRA | Application recommened |
K05 | YG3X | 15.3 | 92 | For finishing of cast iron non-ferrous metal |
K10 | YG6A | 14.8 | 91.5 | For drawing dies and wood wooking tools |
K20 | YG8 | 14.6 | 89.7 | For drawing dies or milling of cast iron |
M10 | YW1 | 13 | 91 | For semi-finishing and finishing of stainless steel |
M20 | YW2 | 12.9 | 90.5 | For machining of train’s wheel hubs |
P10 | YT15 | 11.3 | 91.5 | For semi-finishing and finishing of stainless steel |
P20 | YT14 | 11.4 | 90.5 | For semi-finishing and finishing of stainless steel |
P30 | YT5 | 12.8 | 89.5 | For heavy duty rough tuming of steel |
Producing process:
Categories of our products:
1) Carbide drawing dies;
2) Carbide rods;
3) Carbide strips;
4) Carbide inserts;
5) Carbide disc cutters;
6) Carbide balls/ tire studs/
7) Carbide drilling bits;
8) Carbide Plates,
9) Carbide cold-forging dies;
10) Other customized items.
About our service
1) OEM & ODM are welcomed;
2) customized design is available;
3) reply your enquiry in 24 working hours;
4) experienced staffs answer all your questions in fluent English